User's Manual

TRN-TABLET3
Page 40
 Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.

Disabled
Normal POST messages displayed

Enabled
DEFAULT
OEM Logo displayed instead of POST messages
 Launch PXE OpROM [Disabled]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network
devices.

Disabled
DEFAULT
Ignore all PXE Option ROMs

Enabled
Load PXE Option ROMs.
 Option ROM Messages [Force BIOS]
Use the Option ROM Messages option to set the Option ROM display mode.

Force
BIOS
DEFAULT
Sets display mode to force BIOS.

Keep
Current
Sets display mode to current.
 UEFI Boot [Enabled]
Use the UEFI Boot option to enable or disable to boot from the UEFI devices.

Enabled
DEFAULT
Boot from UEFI devices is enabled.

Disabled
Boot from UEFI devices is disabled.
 Boot Option #1 [PO:M.2 (S80) 3MG-P]
Use the Boot Option #1 option to specify the boot priority from the available devices.