FDTV2 Owner’s Manual FDTV2 Flat Antenna Indoor Television Antenna
About Your TERK FDTV2 Flat Antenna FDTV2 Thank you for choosing the TERK FDTV2. TERK antennas are designed to deliver sharp, clear reception of digital signals. At TERK, our engineering department is dedicated to designing antennas that enhance both the latest technology and the aesthetics of any viewing environment. The FDTV2 installs in minutes and is easy to use.
Installing your FDTV2 antenna FDTV2 Find the best location for the Antenna Before you connect the antenna, determine the best spot in your home for optimum reception. Visit www.antennaweb.org to see where your local broadcasts are coming from. Then, try as much as possible to avoid obstructions between these transmitters and your antenna.
Installation (continued) FDTV2 Attaching the Stand The provided stand attaches to the back of the FDTV2 for standing the antenna upright. To attach the FDTV2 stand: 1. Line the pegs on the stand with the slots on the back of the antenna. 2. Insert the pegs in the slots and pull up to lock the stand into place.
Installation (continued) FDTV2 Connecting the FDTV2 You can connect the FDTV2 directly to your TV or use it with a converter box or other tuning device with an antenna input (such as a cable box or satellite receiver). To connect the FDTV2 directly to your TV: 1. Make sure your TV is turned off. 2. Connect the FDTV2’s built-in coaxial cable to the antenna input on your TV. FDTV2 Built-In Coaxial Cable TV 4 3. Run your TV’s tuner/channel setup to scan for available broadcast channels.
Installation (continued) FDTV2 To connect the FDTV2 to a converter box: 1. Make sure your converter box is turned off. 2. Connect the FDTV2’s built-in cable to the antenna input on the converter box. FDTV2 Built-In Coaxial Cable Converter Box Audio/Video Coaxial –or– Cable Cables TV 3. Follow the directions in the manual that came with your converter box to connect it to your TV. 4. Run your converter box’s setup routine to scan for available broadcast channels.
Troubleshooting FDTV2 I have a cable ready TV. Why am I not getting any channels above 13? The tuners inside of cable ready TVs have two modes. One mode is for cable and the other mode is for antenna. When the TV is in cable mode, and you are using an antenna, you will not be able to receive any channels above 13. To fix this, simply access the menu of your TV and switch the TV from Cable/CATV mode to ANT/AIR mode. I have my TV in a metal cabinet.
12 Month Limited Warranty Audiovox Electronics Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor.