Operation Manual

• Fill the tank with water.

• Choose the desired steam output by turning the steam control dial (4).

NOTE

• Steam is delivered only if knob (12) was set to symbols , max.

• When the iron is placed vertically during ironing pauses, the steam delivery is

automatically cut off.

• Some water drops can come out together with the steam on rst use. This is to be

considered normal. Before ironing your linen carry out some tests on an old cloth.

• Set the steam control dial (4) to the “0” position (dry ironing).

DRY IRONING

• Make sure the steam control dial (4) is in the “0”

position (dry ironing).

• Completely unroll the power cord (10), put the iron in

a vertical position and connect the plug to the power

outlet.

• With the temperature control knob (12) select the

temperature which is most suitable for the type of

fabric to be ironed.

• The thermostat light (9) turns on and will then

turn off when the soleplate reaches the selected

temperature. The iron is now ready for use.

IMPORTANT

• Before and during use make sure the work surface is stable and heat resistant.

• Never leave the iron unattended when it is connected to the power supply.

• Do not use the iron if it has been dropped, if there are signs of damage or if water

leaks.

SUGGESTIONS

• First iron more delicate fabrics which require low temperature and then the more

resistant ones which require higher temperatures.

• Before ironing pass the iron over a small hidden area of your item of linen to make sure

the temperature selected is suitable for that type of fabric.

PUTTING INTO OPERATION

STEAM IRONING

Fig.2