Operation Manual

 ENGLISH

Fig.1

PRELIMINARY OPERATIONS

After removing the appliance from the package, wash carafe (12),

measuring spoon (9) and coffee filter (4) with water and dish soap.

When it is used for the first time or after a long idle period, use the

machine to make 2-3 espresso, so as to remove any unpleasant tastes.

ESPRESSO

Unscrew cap (1) of the appliance counterclockwise and fill the boiler

container with cold water.

The quantity for two or four cups is indicated on carafe (12).

WARNING!

The maximum water quantity is 240 ml.

Screw boiler cap (1) with maximum care by

rotating it clockwise.

Position filter (4) in filter holder (6) and fill it

with the necessary quantity of coffee. Special

marks on the inside of the filter show the

appropriate levels for 2 and 4 cups of coffee

(fig.1).

If necessary, remove any excess coffee from

the edge of the filter holder.

Verify that the selector knob (2) is in

the “OFF” position (machine off) and

then plug the appliance into the wall

socket.

Insert the filter holder (6) in its seat

and rotate it as indicated in figure 2.

Place carafe(12) under the filter holder

and ensure that the spout of the filter

holder is aligned with the hole in the

carafe lid.

Turn selector knob (2) to position

h to switch on the machine. Pilot

light (3) lights up.

Fig.2