Operation Manual

ŸŸŸ ENGLISH
KNEAD1
3-14 min.
Program element Time
RISE1 20-60 min.
KNEAD2
8-24 min.
RISE2
1-60 min.
RISE3
20-120 min.
BAKE
0-80 min.
WARM
0-120 min.
•Put the plug into the wall socket. A short beep will be heard and the
backlight of the display will switch on for about 30 seconds.
The display will show Program 1, time 3:20 and temperature 180°C.
The two points (:) in the time indication do not blink to show that the
program is not running.
•Press the MENU button (a) repeatedly till program number 11 (HOME
MADE) is displayed.
•Press the PROCESS button (e) on the control panel.
On the display you can see that KNEAD1 starts blinking and the
display shows the time setting for this KNEAD1 element of the program.
Change the setting by pressing the TIME button (d) repeatedly. Each
time you press the TIME button (d), the time setting will increase by
one minute. If you keep the TIME button (d) pressed, the time setting
will increase faster. When the time setting has reached the maximum
setting, press the TIME button (d) again to go to the minimum time
setting again. Adjust the time setting to the required setting.
•Press the PROCESS button (e) to go to the setting of the next
program phase (RISE1). Change the time setting in the same way as
described above.
•Press the PROCESS button (e) each time to adjust time settings for
the remaining program elements: KNEAD2, RISE2, RISE3, BAKE; in
addition to the time it is also possible to select the baking temperature
by pressing the TEMPERATURE button repeatedly till the desired
temperature and WARM are displayed.
The time ranges are as follows: