Instruction manual

• Screwcompletelythexingscrew(15)inthehousingundertheappliancetoxthe
tieracktothehangerrod(g.8).
• Tousetheappliancewithrodshavingacircularproleandadiameterof18mmitis
necessarytoassembletheadapter(14)onthetubeatthepointwheretherodblock
ispositioned(10)(g.9)andthenproceedwiththescrewtightening(15).
• To use the appliance with rods having an oval prole and 30x15 mm size it is
necessarytoassembletheadapter(13)onthetubeatthepointwheretherodblock
ispositioned(10)(g.9)andthenproceedwiththescrewtightening(15)
NOTE
• Thediametersandshapesofthehangerrodsarenotallthesame:ifneeded,itis
necessarytoxtheadapter(13or14)onthetubebeforexingtheapplianceto
the rod.
• After the assembly, make sure that the equipment xed on the rod is perfectly
horizontal.
• Place the ties on the hooks (6) and the belts on the hooks (16).
• Pressthebutton(2)orthebutton(4)tomovethehooksandthenthetiestotheleft
ortotherightandsubsequentlypressthestopbutton(3)tostoptherotation.
• If the stop button is not pressed, the rotation of the hooks will stop automatically
afterabout20seconds.
Fig.6 Fig.7 Fig.8
OPERATION AND METHOD OF USE
Fig.9 Fig.10
ENGLISH