User Manual

765
Wiring 2 Wiring and simplified internal circuit..
Figure .
Mounting the stat and warm floor system
1
thermo « »
Mounting tube
Coupling
Sensorin the tube
Installation tape
Heating cable
Sealing end
of the tube
h
123456
1
2
SSD
CВ
L
box with automatics
sensor
t°
РЕ
230 V Hz~ 50
load
zero
phase
NL
N
N
N
1А1
А2 2 4
3
contactor

energy consumption graphs in kWh and monetary
terms;

Nobody is home and Preheat functions (self-learning);

granting access to other family members;

WLAN control from a mobile app;

voice control via Google Assistant.

weekly schedule;

single control over a group of thermostats;
Smart functions allow you to save up to 50% by
maintaining a comfortable floor temperature when you
need it only.
8
In the absence of the Internet, the thermostat will
continue its operation according to the latest settings. In
addition, you can control the thermostat via the thermostat
buttons or offline mode in the terneo app. Please note that
instead of landline connection modes, you can use mobile
data. To do this, you need a separate device (for example,
a smartphone) with a WLAN Hotspot to share.
Not recommended to use in networks with Multi WAN
technology.

regime button before emergence of the
inscription
« »
≡
«APC»;
The WLAN connection does not have to be 5G.
6. Enter the name and password from your Wi-Fi.
In order to pass to Access Point :« »AP
4. In the application press , further press «Device»
or , further «Add th» further «Device».
«+»
, « »
≡
If to say in brief, the cloud is intended for the safe
keeping of the data in the net Internet, comfortable and
safe long-distance connection and operation
« »
.
Internet connection available the stat constantly
synchronizes with the cloud, performs its commands,
receives the latest settings and sends the telemetry about
its status. If you block the remote control of the thermostat,
the cloud can only be used to accumulate statistical data
(see details in Table 1). For the statistics and heating
schedule to operate correctly, after connecting to the
thermo
« »
« »cloud , specify your time zone. Further, the thermostat will
independently update the date and time online.
1. Download the free app «terneo» on Google Play and
launch it.
3. Turn the thermostat to the mode — «AP» Access Point
mode. Upon the first switching on of the thermostat will
stay in the Access Point mode during approximately 10
minutes. If during this period of time there is no connection
to the thermostatic regulator, there will automatic return to
the Client mode .« ı»Cl
When restoring the Wi-Fi connection of the stat
with the cloud, all settings are synchronized
thermo
.
2. Register or log in with the help of your Facebook
account Apple ID or Google accoun , .

using or replace value with «+» «–» «Clı»
«AP».
If previously you connected the thermostat to
your Wi-Fi network or want to use these
settings, choose Т« ı» Cl Client mode ( а 1).ble
Setup and terneo Account for Android
When connecting to the thermostat in the
Access Point mode, on the screen there will be
a message like (conneсtion) every 5
s .
«con»
econd
5. Select the Wi-Fi network created by the thermostat (for
example, terneo sx_А68FDB ).
The app will show you how to connect your thermostat. In
the presence of the internet, the thermostat will be added to
the main application screen and registered in the «cloud» .
Setup and terneo Account for IOS
1. Download the free app «terneo» on Google Play and
launch it.
2. Register or log in with the help of your Facebook
account Apple ID or Google accoun, .
3. Turn the thermostat to the mode — « »AP Access Point
mode. Upon the first switching on of the thermostat will
stay in the Access Point mode during approximately 10
minutes. If during this period of time there is no connection
to the thermostatic regulator, there will automatic return to
the Client mode .« ı»Cl
In order to pass to Access Point :« »AP

regime button before emergence of the
inscription
« »
≡
«APC»;

using or replace value with «+» «–» «Clı»
«AP».
When connecting to the thermostat in the
Access Point mode, on the screen there will be
a message like (conneсtion) every 5 s. «con»
6. . Go to WLAN settings on your iPhone Connect to Wi-Fi
network, created by the thermostatic regulator (for example,
terneo x_A68FDB). If a password is required for the
connection, enter DSEXXXXXX, where XXXXXX is the last
six symbols in the name of network (for example:
DSEА68FDB).
5. Select the Wi-Fi network created by the thermostat,
press «Further». The WLAN connection does not have to
be 5G.
4. In the application press , further press «Device»
or , further «Add th» further «Device».
«+»
, « »
≡
Then return to the app and the app will show you how to
connect your thermostat .
the thermostat will be added to the main application screen
and registered in the «cloud».
In the presence of the internet,
Setup and terneo Acc unt through o
web page my.terneo .ua
2. Go to WLAN settings. On the desktop connect to WiFi
In order to pass to Access Point :« »AP
When connecting to the thermostat in the
Access Point mode, on the screen there will be
a message like (conneсtion) every 5
s .
«con»
econd
1. Turn the thermostat to the mode — « »AP Access Point
mode. Upon the first switching on of the thermostat will
stay in the Access Point mode during approximately 10
minutes. If during this period of time there is no connection
to the thermostatic regulator, there will automatic return to
the Client mode .« ı»Cl

regime button before emergence of the
inscription
« »
≡
«APC»;

using or replace value with «+» «–» «Clı»
«AP».
network, created by the thermostat (for example, terneo
sx_А68FDB). If a password is required for the connection,
center SEXXX XXX, where XXX XXX is the last 6
symbols in the name of network (for example:
DSEА68FDB). The Android operating system may prompt
you to confirm the connection to a WLAN network that
does not have access to the Internet. To continue the
connection, click Do not disconnect« ».
4. On the thermostat page, select your Wi-Fi network and
enter its password. . Click the «Connect» button
5. The thermostat during one minute will generate the
connection to your Wi-Fi net. The successful connection
to the WLAN network will be indicated by the constant
glow of the blue indicator of the thermostat.
If the thermostat screen does not display or
the WLAN connection is failed
«P » « P»in i
.
3. In the address bar of the browser, type 192.168.0.1
6.
thermostat will display PIN-code, necessary for the
connection to «cloud» (
After the successful connection the screen of the
three-digit number without any
additional characters).
7. Go to WLAN settings on your phone and make sure
you are already connected to your home WLAN network.
8. In the address bar of the browser, enter my.terneo.
9. Register or log in with the help of your Facebook
account Apple ID or Google accoun , .
* f there is no PIN-code on the thermo
screen, read the chapter «PIN-code for
registration in the cloud
I stat
or local IP» table 1.
10. lick «+ Add» – «Device» and
enter a name (for example, «Bedroom») and a pin-code
On the desktop app c
,
which is displayed* on the thermostat screen. Press
« » .Next and device will be added
If the thermostat displays instead of a
PIN code, this indicates no connection with
the cloud
«iP»
« ».
MOUNTING OF THE SENSOR MUST BE
PERFORMED SO THAT IT WAS POSSIBLE TO
EASILY REPLACE IT.
SMART REMOTE
CONTROL FEATURES
CONNECTING TO THE CLOUD« »
FOR CONTROL FEATURES
TO CHANGE THE PASSWORD OF YOUR WI-FI
NETWORK, follow the first six points of the section
«Connecting through my.terneo».web page
there is a connection
with the cloud
no Wi-Fi connection
r Wi-Fi offo
mode Access Point (AP)
the mode Client is a Wi-Fi,
but there is no connection
to the cloud
STATUS OF THE BLUE INDICATOR
on the thermostat indicates the WLAN mode
and connection with the cloud« »
2 times / sflashing
1 time / 3 sflashing
lights
does not light