Certifications 2

SDS No.: 633048 V002.0

TEROSON MS 939 WH

Page 6 of 13

Respiratory protection:

The product should only be used at workplaces with intensive ventilation/extraction.

If intensive ventilation/extraction is not possible respiratory protection equipment with ABEK P2 filter (EN 14387) should be

worn.

Hand protection:

Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least

protection index 2, corresponding to > 30 minutes permeation time as per EN 374): Polychloroprene (CR; >= 1 mm thickness) or

natural rubber (NR; >=1 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6,

corresponding to > 480 minutes permeation time as per EN 374): Polychloroprene (CR; >= 1 mm thickness) or natural rubber

(NR; >=1 mm thickness) This information is based on literature references and on information provided by glove manufacturers,

or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective

gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many

influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.

Eye protection:

Protective goggles

Protective eye equipment should conform to EN166.

Skin protection:

Wear protective equipment.

Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.

Advices to personal protection equipment:

Use only personal protection that's CE-labelled according to Directive 89/686/EEC (Europe) or to Regulation No. 819 of 19

August 1994 (Norway).

The information provided on personal protective equipment is for guidance purposes only. A full risk assessment should be

conducted prior to using this product to determine the appropriate personal protective equipment to suit local conditions.

Personal protective equipment should conform to the relevant EN standard.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties

Appearance

paste

pasty

white

Odor

characteristic

Odour threshold