User's Manual
Table Of Contents
- The TerraPlayer User Guide
- TerraPlayer License Agreement and Warranty
- User Guide Table of Contents
- Chapter 1: Introducing the TerraPlayer
- Thanks and Welcome!
- Introducing the TerraPlayer
- The TerraTouch OS™
- TerraPlayer Utility Suite
- Features and Benefits
- Requirements
- How it Works
- Acknowledgements
- Chapter 2: Hardware and Connections
- Chapter 3: The TerraTouch OS(
6/25/2003 ©2003 TerraDigital Systems, LLC
18
DRAF
T
Register/Join the TerraPlayer Radio and Base Transceiver
When you update the firmware in the Base Transceiver or TerraPlayer Radio, or if you
add an additional Radio to a Base, you must reconnect the RF Link as follows:
1. Set up the TerraPlayer Radio and JOIN the RF Network
After you set up the TerraPlayer Radio, power it up and press the following buttons:
SETTINGS f SYSTEM f NETWORK f WIRELESS
The TerraTouch OS will display information about the current status of the wireless RF
link:
2. Register the new TerraPlayer Radio on the Base Transceiver
Once the Radio has joined the RF Network press the Register button on the Base
Transceiver for it to acknowledge the new TerraPlayer Radio. The JOIN and Register
buttons must be pressed within 30 seconds of each other, or they timeout.
Base Transceiver:
Press the Register
button to
acknowledge the
new Radio.
Radio:
Tap the JOIN
button in System
Mode,
RF NET View