User's Manual

6/25/2003 ©2003 TerraDigital Systems, LLC
85
DRAF
T
SETTINGS
The SETTINGS page allows you to configure the network connection. This page breaks
down into several other pages when you click on the SHARE ACCESS
PARAMETERS, SCAN MODE, SET SHARE PATH, SCAN NETWORK, or LAN
SETTINGS buttons.
LAN Settings
When you first access the SETTINGS page, it displays the LAN settings of the Base.
The parameters default to DHCP SETTING. If you deselect the DHCP SETTING
option, you can change LAN parameters by clicking into each parameter field to change
the setting, then clicking SET.
The LAN SETTINGS parameters are as follows:
Parameter Definition
DHCP SETTING Dynamic Host Control Protocol. This is a standard protocol for getting
the IP Address and other network parameters. Uncheck this to edit
network parameters.
SUBMASK ADDRESS The Submask Address defines a subgroup of machines on the network
that the Base Transceiver can access.
GATEWAY ADDRESS The Gateway Address defines the IP Address of the network gateway
server which the Base uses in accessing the network.
SNTP ADDRESS Simple Network Time Protocol. The SNTP Address is the IP Address
the Base uses when setting the clock for standby mode.