User's Manual

6/25/2003 ©2003 TerraDigital Systems, LLC
50
DRAF
T
UPGRADE
Tap UPGRADE for controls upgrading the firmware in the Base Transceiver and
TerraPlayer Radio.
The following table defines the fields displayed on the screen:
SERIAL #
Serial number of the Base Transceiver or TerraPlayer Radio.
MAC ADDRESS
MAC Address of the Base Transceiver or TerraPlayer Radio.
PHY ADDRESS
Physical Address of the Base Transceiver or TerraPlayer Radio.
FLASH ID
Flash memory type.
FIRMWARE
Release version number of firmware.
BOOT
An upgradeable memory location in the TerraPlayer.
NVRAM
Version of NVRAM.
FPGA
An upgradeable memory location in the TerraPlayer.
APP
An upgradeable memory location in the TerraPlayer.
VERSION
Version number of the Current and Upgrade firmware.
DATE
Date of the firmware build.
TIME
Time of the firmware build.
FILE SIZE
Size of the Current and Upgrade firmware files.
Upgrading the TerraPlayer Firmware
1. Download the latest available firmware upgrade
Visit the TerraDigital website (www.terraplayer.com) to download the latest firmware
upgrade. Store the files in one of the shared folders on PC accessible by the TerraPlayer.
2. Press the FIND button
When you press the FIND button, the Base Transceiver will scan the computer for an
update file stored in a shared folder. If it finds a new update file, it will indicate this by
listing information about that file under the UPGRADE 1 heading, as shown here:
Tap
Base/Ra
dio to
switch
between
the two.