User's Manual

DRAF

3. Update the TerraPlayer Radio

Important! If there are upgrades for both the Radio and the Base, it is always a good

idea to perform the Radio updates first.

To update the Radio, press the RADIO button, then press the UPDATE button. The

Radio will indicate that it is downloading the upgrade—please wait until it is finished.

4. Reboot the TerraPlayer Radio

Once the upgrade is finished, press the REBOOT button.

5. Update the Base Transceiver

To update the Base, access the System Mode, FIRMWARE View, press the BASE

button, then press the UPDATE button. The TerraPlayer Radio will indicate that it is

downloading upgraded firmware into the Base Transceiver—please wait until it is

finished.

Helpful

Hint

You can also use the WebServer Utility to upgrade the Base

Transceiver. The Base Transceiver can also be upgraded remotely from a

computer by using the WebServer of the TerraPlayer Utility Suite.

) Refer to Upgrading the firmware in the Base Transceiver on page 92.

CLOCK

If you press the CLOCK button, the TerraTouch OS will display the clock which appears

if Standby Mode is enabled.

ABOUT

If you press the ABOUT button, the TerraTouch OS will display information about the

firmware currently installed.