User Manual

Step 1: Search for TNAS Devices

Before initialising your device, you need to ﬁnd your TNAS device on the network. To ﬁnd your TNAS, open the

TNAS PC desktop application on your computer and click “Search”.

Step 2: Start Initialisation

Select your TNAS from the search list and click “Login”. If your TNAS is not initialised, you will be redirected

to the initialisation page. Please Click “Start” to initiate the initialisation process.

Model:F2-210

Step 3: Hard Drive Detection

If the installed hard drive is detected by TNAS, bootstrap initialisation will automatically proceed to the next

step. If the hard drive is not installed, please install the hard drive and click “Recheck”. Since TNAS

supports hard drive hot swap, the hard drive can be directly installed without having to turn the power oﬀ.