Use Instructions

Instruction for Use

plasma care and plasma care spacer

IFU plasma care© and plasma care© spacer

Version: 0.1

Date: 26.05.2020

Page 17/38

• The integrated safety grid prevents contact of the patient or the operator with the

plasma source integrated into the plasma source unit, while it produces plasma.

• An unambiguous identification of the attached spacer is enabled via an integrated

RFID-transponder. After using the spacer, it is marked as “invalid” and cannot be used

for any further treatments. In case of an invalid spacer, the plasma care® device can-

not be activated.

• With one spacer a maximum of 6 plasma treatments can be performed on a single

patient. The use of a spacer on more than one patient is not permitted due to the cross-

contamination risk.

6.4 User interface

The user interface indicates the system status and is used for controlling the device. The follow-

ing status displays are possible:

On / Off (white):

By exerting extended pressure, the plasma care® is switched on or off. If the plasma care® is

switched on, the On / Off button will glow white.

Plasma ring (blue):

RFID-tag

safety grid

Off