Use Instructions

Instruction for Use

plasma care and plasma care spacer

IFU plasma care© and plasma care© spacer

Version: 0.1

Date: 26.05.2020

Page 20/38

4. Place the plasma care® into the docking station.

5. When the plasma care® is placed into the docking station and charges, the battery-

LED will flash from red, yellow and green. When the plasma care® is fully charged the

battery symbol will only flash green.

6. For the very first use, the plasma care® should be fully charged. This can take up to 3

hours.

ID004

Do not use excessive force or remove the plug by pulling on the cable as the

cable might be damaged thereby.

ID005

Do not use excessive force to attach a country-specific adapter plug to the

power supply. The electrical contacts might be damaged thereby.

ID007

Wait until the plasma care® has adjusted to the permissible environmental tem-

perature, especially if the plasma care® has previously been transported or

stored under environmental conditions outside of its defined operation values.

ID004b

Only use the original power supply delivered by the manufacturer. The use of

other power supplies is not admissible.

plasma care©

docking station