Use Instructions

Instruction for Use
plasma care and plasma care spacer
IFU plasma care© and plasma care© spacer
Version: 0.1
Date: 26.05.2020
Copyright: terraplasma medical GmbH
Page 32/38
The plasma care® can be stored at a relative humidity between 15% and 90%
RH.
The plasma care® spacer can be stored at temperatures between -20°C and
+55°C until the end of its use-by date.
The plasma care® spacer must not be used after its use-by date is passed.
The plasma care® spacer can be stored at a relative humidity of 20% and 75%
RH.
The plasma care® and the plasma care® spacer can be stored at atmospheric
pressure between 700 hPa and 1060 hPa.
11.3 Transport conditions
The plasma care® can be transported inside its packaging at temperatures
between +5°C and +45°C.
The plasma care® can be transported inside its packaging at a relative humid-
ity between 15% and 90% RH.
The plasma care® spacer can be transported inside its packaging at temper-
atures between -20°C and +55°C.
The plasma care® spacer can be transported inside its packaging at a relative
humidity between 20% and 75% RH.
The plasma care® and the plasma care® spacer can be transported inside
their packaging at atmospheric pressure between 700 hPa and 1060 hPa.
12 Service life
The expected minimal service life of the plasma care® is 1 year from first use, if the required
servicing cycles are observed.
ID038
If the plasma source unit is used beyond its expected service life the plasma
care® will indicate this via a permanent red glow of the four segments of the
plasma ring and the plasma source unit needs to be replaced.
The exchangeable plasma care® spacer is intended for single-use. The plasma care® spacers
have a separate use-by date that is indicated on the primary sterile packaging.