Use Instructions

Instruction for Use
plasma care and plasma care spacer
IFU plasma care© and plasma care© spacer
Version: 0.1
Date: 26.05.2020
Copyright: terraplasma medical GmbH
Page 7/38
2.3 Warning and safety notes
2.3.1 Starting-up the medical device
ID001
Only use the plasma care®, after having read and understood the instructions
for use in its entirety. Non-compliante usage of the devicedue to disregard of
the manual can lead to personal injury or damage to property.
ID002
Only use the plasma care® with the specified line voltage. Otherwise disturb-
ances, outages, smoke emission and even fire can occur.
ID003
Only use the plasma care® in dry rooms, which are not at any risk of explosion
and only in rooms with sufficient ventilation and lighting.
ID004
Do not use excessive force or remove the plug by pulling on the cable as the
cable might be damaged thereby.
ID004b
Only use the original power supply delivered by the manufacturer. The use of
other power supplies is not admissible.
ID005
Do not use excessive force to attach a country-specific adapter plug to the
power supply. The electrical contacts might be damaged thereby.
ID006
Only use the plasma care® in environmental conditions as defined in chapter
11. Excessive heat/cold or humidity can limit the functionality of the plasma
care® or destroy it.
ID007
Wait until the plasma care® has adjusted to the permissible environmental tem-
perature, especially if the plasma care® has previously been transported or
stored under environmental conditions outside of its defined operating condi-
tions.
ID008
Ensure that the plasma care® and in particular the plasma source is not con-
taminated, smutched or damaged.
ID009
Before each use of a spacer, make sure that the sterile packaging is not dam-
aged and has not already been opened prior to usage of the spacer.