User manual

Finish movie 33
1. Set up burner and burn speed: If you have multiple burners installed, you can
select which device you wish to use in this menu. The burn speed depends on
the type of blank disc being used and can only be set after it has been inserted
into the drive.
2. Encoder settings: Use the “Encoder” button to access the selection dialog where
you can specify the properties of the MPEG Encoder (memory requirements,
quality and duration of the MPEG conversion).
3. Start disc burning/video encoding: "Burn disc" starts the disc burning process.
Every time you burn and every time a simulation is carried out, the disc project is
encoded into MPEG-2 formatfor DVDs and Blu-ray discs, and into MPEG-4
format for AVCHD discs. You have the option of choosing a storage location for
the video file on the hard drive. Please note that the MPEG file is not deleted
from the hard drive after the burn process has finished. Depending on the length
of the project, encoding and burning may take some time. The time remaining
can be seen in the dialog.
Encoder settings
Use the “Encoder settings...” button to access the selection dialog to specify the
properties of the MPEG encoder (memory requirements, quality, and duration of the
MPEG conversion
Presets: These are the additional settings for the selected disc type. Normally,
MAGIX Video easy 5 HD will automatically select the right settings.
Longplay DVD DVD with extra-long playing time in PAL -format. The
bit rate is reduced, which compromises quality.
Standard DVD Normal DVD
Standard DVD widescreen Normal DVD in 16:9- widescreen format