Drahtloser DVB-S Empfänger Deutsch CONNECT N3 English Quick Setup Guide Version 1.
CONNECT N3 Herzlich Willkommen! Wir freuen uns, dass Sie sich für ein Produkt aus dem Hause TERRATEC entschieden haben! Bitte nehmen Sie sich vor der Inbetriebnahme ein paar Minuten Zeit, um sich eine Übersicht der Funktionen und Anschlussmöglichkeiten des Receivers anhand des Handbuchs zu verschaffen. Wir wünschen Ihnen viel Freude mit Ihrem CONNECT N3! Details des CONNECT N3 • TV-Empfänger für DVB-S am Computer • Satellitenfernsehen kabellos am PC und Notebook genießen • DiSEqC 1.
• Lesen Sie die Bedienungsanleitung sorgfältig durch und bewahren Sie diese auf. • Beachten Sie die Warnhinweise und folgen Sie den Anweisungen, um Beschädigungen zu vermeiden. Deutsch Sicherheit • Um Feuer, elektrische Schläge oder Schäden am Gerät zu verhindern, stellen Sie das Gerät bitte auf einen ebenen und trockenen Untergrund. • Halten Sie das Gerät von direkter Sonneneinstrahlung, Heizkörpern, offenen Flammen und anderen Wärmequellen fern. • Benutzen Sie nur das beigelegte Netzteil.
CONNECT N3 Die Hardware in der Übersicht LAN Aktivitätsanzeige Betriebsleuchte WLAN Aktivitätsanzeige Gerät auf Sendung WPS Aktivitätsanzeige Ein/Ausschalter WPS Schalter Ein/Ausschalter: Halten Sie den Taster für ca. 2 Sekunden gedrückt um das Gerät ein bzw. auszuschalten. LAN Aktivitätsanzeige: Leuchtet bei eingestecktem Netzwerkkabel, blinkt bei Datenübertragung. WLAN Aktivitätsanzeige: Aus bei deaktiviertem WLAN, blinkt wenn Wireless LAN eingeschaltet und aktiv ist.
Die Fernbedienung English Deutsch Die Fernbedienung stammt aus unserer PC-TV-Serie und ist mit den gängigsten Software-Programmen kompatibel. Hier finden Sie eine kurze Übersicht zu den im Media Center benötigten Tasten. Weiterführende Informationen entnehmen Sie bitte dem Remote Control Editor Handbuch welches Sie auf der Treiber CD finden und von unserer Webseite (www.terratec.de) herunterladen können. Zahlentasten Tasten zum Umschalten auf ein bestimmtes Programm.
CONNECT N3 Inbetriebnahme Sobald Sie alles ausgepackt und in Augenschein genommen haben, würden wir folgende Vorgehensweise empfehlen um den N3 in Betrieb zu nehmen. Installation Netzwerkkabel (empfohlen) Schließen Sie das Gerät mit dem im Lieferumfang enthaltenen Netzwerkkabel an den Router an, somit ist er ohne Einstellungen tätigen zu müssen im Netzwerk integriert und wird beim Software-Setup problemlos erkannt.
Installation WLAN (Manuell) English Deutsch Alternativ kann der N3 auch manuell eingerichtet werden. Klicken Sie dazu einmal mit der linken Maustaste auf das WLAN-Symbol im Infobereich der Taskleiste. Es erscheint eine Übersicht mit allen verfügbaren WLAN-Netzwerken in der Umgebung. Ist der N3 eingeschaltet, wird auch er dort aufgelistet. Klicken Sie doppelt auf den N3 Eintrag. Windows wird jetzt versuchen eine Verbindung herzustellen.
CONNECT N3 Software / Treiber Installation Ist der N3 mit dem Netzwerk verbunden, kann die mitgelieferte Software installiert werden. Legen Sie dazu die Treiber CD ein, der Autostarter ruft automatisch das Setup Menü auf. Sollte dies nicht der Fall sein, starten Sie die Autorun.exe bitte manuell über den Windows Explorer. 1. Schnelleinstieg lesen Dieses Handbuch als PDF-Datei. 2. Treiber installieren Installiert den benötigten Treiber und die Applikation zur Verwaltung des N3 auf Ihrem System. 3.
Es handelt sich um eine Software, welche als Schnittstelle zwischen Computer und Fernbedienung arbeitet. Sie haben damit die Möglichkeit die Tasten an unterschiedliche Programme anzupassen. Möchten Sie nur das Media Center fernbedienen, ist keine weitere Handlung notwendig. Möchten Sie sich intensiver damit auseinandersetzen, finden Sie alle benötigten Informationen im Handbuch des Remote Control Editors auf der Treiber und Software CD oder auf unserer Webseite.
CONNECT N3 Media Center Rufen Sie im Windows Media Center das Setup auf um das TV-Signal für den Empfang einzurichten. Sie finden dies unter Aufgaben ► Einstellungen. Wählen Sie dort TV ► TV-Signal ► TV-Signal einrichten und folgen Sie den Anweisungen am Bildschim. Bestätigen Sie das Ergebnis der TV-Signalerkennung und der Satelliten Auswahl.
Deutsch English Führen Sie anschließend noch einen vollständigen Transponder-Suchlauf durch um eine aktuelle Senderliste zu erhalten. Nach dem die Sender gefunden und abgespeichert wurden, können Sie das Fernsehprogramm über das Hauptmenü ► Live-TV aufrufen.
CONNECT N3 Glossar SSID (ESSID): Als Service Set Identifier (SSID) oder auch Network Name bezeichnet man eine Funk-Netzwerk-Kennung, das auf IEEE 802.11 basiert. Jedes Wireless LAN besitzt eine konfigurierbare, so genannte SSID oder ESSID (Extended Service Set Identifier), um das Funknetz eindeutig identifizieren zu können. Sie stellt also den Namen des Netzes dar. WEP-Verschlüsselung: (Wired-Equivalent-Privacy) beschreibt einen Verschlüsselungsstandard für WLANs.
Wireless DVB-S Receiver Deutsch CONNECT N3 English Quick Setup Guide Version 1.
CONNECT N3 Welcome! We‘re pleased that you‘ve chosen a TERRATEC product! Please take a few minutes time before starting to get an overview of the connectivity and features of the receiver. We hope you enjoy using your CONNECT N3! Product Features • TV receiver for DVB-S on the computer • Enjoy Satellite TV wireless on your PC and notebook • DiSEqC 1.
Deutsch Safety • Read carefully through the operating manual and keep it in a safe place. • Observe all warnings and follow the instructions to avoid damage. • Place the device on a plane and dry surface to prevent fire or electric shocks as well as possible damage to the product itself. • Keep the device away from direct sunlight, radiators, open flames and other sources of heat. • Only use the accompanying power supply.
CONNECT N3 Hardware Overview LAN activity light Device on air Power light WLAN activity light WPS activity indicator On / off switch WPS switch On / off switch: Hold down the button for 2 seconds to turn power on / off. LAN activity: Lights up when network cable is connected, flashes during data transfer. WLAN activity: Off when WLAN is disabled, blinks when wireless LAN is on and active. Power light: Off when not connected to the power supply. Red in standby, blue when turned on.
English The remote control comes from our PC-TV series and is compatible with most popular software programs. Here is a short overview of the Media Center keys you need. For more information, please see the Remote Control Editor manual which can be found on the driver CD and downloaded from our website (www.terratec.com) . Deutsch The Remote Control Number buttons Buttons to switch to a specific program. Directional pad Navigation buttons to control the selection bar on the menus.
CONNECT N3 Startup Once you have unpacked and examined everything, we would recommend the following procedures to get started. Setup network cable (recommended) Connect the device with the included network cable to the router. So it is integrated in the network without have to make settings and the software setup easily detects the hardware. Now connect the power adapter to it and press the on / off switch on the front for 2-3 seconds. The N3 runs a start, which may take several minutes.
Installation WLAN (manual) You will see a summary of all available wireless networks in the area. If the N3 is turned on, it will also be listed as explained underneath. Double click on the N3 entry, Windows will now try to connect. Because the N3 is encrypted with WPA2, it appears a query of the the wireless key. Enter the WPA2 key, which you can find on the bottom of the N3. You can then continue with the software installation. 19 English Deutsch Alternatively, the N3 can be set up manually.
CONNECT N3 Software / Driver Installation Once the N3 is connected to your network, you can install the included software. 1. Quick Setup Guide This manual as a PDF file. 2. Driver installation Installs the required drivers and application for managing the N3. 3. Software installation Here you have the option to install additional software (eg TerraTec Home Cinema, Acrobat Reader or the remote control support). 4. Read the Manual The TerraTec Home Cinema Guide in PDF format. 5.
This software works as an interface between computer and your remote control. You have the possibility to adapt the keys to different programs. If you only want to use the Media Center commands, no further action is necessary. Would you like to deal more intensively with it, you will find all necessary information in the manual of the remote control editor on the driver CD. Once everything is installed, you find the icon of the N3 in the Windows taskbar, which can be operated using the right mouse button.
CONNECT N3 Media Center Start the Windows Media Center to setup the reception of the TV signal. You can find this under Tasks ► Settings. Select TV ► Setup TV Signal and follow the instructions on the screen. Confirm the result of the TV signal detection and selection of the satellite.
Deutsch English Afterwards please run a full transponder scan in order to receive an up-to-date station list. After the channels were found and saved, you can start the TV from the main menu ► TV ► Live TV.
CONNECT N3 Glossary SSID (ESSID): The Service Set Identifier (SSID) or network name is the identifier for IEEE 802.11-based wireless networks. Every wireless LAN has a configurable SSID or ESSID (Extended Service Set Identifier) as a unique network ID. In other words, it is the network’s name. WEP encryption: WEP (Wired Equivalent Privacy) describes a type of encryption for WLANs. Naturally, the N3 can also receive and interpret WEP-encrypted data.