Remote Control English Manual Version:29.04.
Contents The Remote Control............................................................................................................... 3 The Remote Control Editor..................................................................................................... 3 Installation .......................................................................................................................... 3 The menu................................................................................................
The Remote Control. If you haven't already done so, connect the IR receiver to its socket on the TV card. Connector for infrared receiver—appearance may vary. The remote control requires two type AAA batteries. Open the battery compartment on the back of the remote control and insert the batteries as indicated by the illustrations in the battery compartment. The infrared remote control provides you with many functions for controlling the TV software from the comfort of your couch.
The menu If you have not made any changes, the window displayed above appears, with similar contents. This overview shows the currently loaded settings for various applications. Of course, some of the applications which appear in the screenshot may not be set up on your system. In order to select other sets of commands than these, or to switch these off, simply click the corresponding field and a dialog window opens with all command sets and the entry "---". Select the entry to disable this menu input.
Autoselect. You can use the "Autoselect" button to clean up your menu at the touch of a button. Clicking it performs a check of whether the program file associated with the instruction set is actually located on your hard drive and/or removes entries between two command sets which have been disabled, and the menu items move more closely together.
Where's the program? When the warning symbol appears as the icon, it indicates that a command set cannot be used at this time. This can happen if you have uninstalled an application, or a preinstalled command set cannot find the executable file in the application's default directory. If, on the other hand, the settings are correct, the correct program icon is displayed. Information.
1. Select the application In order to allow the Windows Calculator to be operated via remote control, we must first icon in the upper area, or right-click an create a new command set. To do this, click the existing list entry to open the context menu and select New.
2. Program the remote control Illustration similar. This takes you to the most important window for assigning functions to buttons. Because this software is also included with the delivery of other products, you can use the "Remote control" pulldown menu to select the TerraTec product you want to use right now. Below it, you see the name of the button you have just pressed, in this case Channel + . This is also indicated by a red outline around the image of the remote control.
· On-screen display menu (OSD) …"On Screen Display" functions such as the clock etc. · System command … Execute or assign basic functions of the operating system. · Key combination … Anything you can do from the keyboard can also be programmed here. · Window … Functions that are familiar from usual window menus, such as maximize etc.
Here is a detailed overview of the individual functions, listed according to command type parameter… On-screen display menu (OSD) Display parameter Function Main menu Use this button to call up the main menu; in the default assignment, the menu is called up using the APP button.
This concludes our discussion of the essential part of assigning functions. For the calculator in our example, this basically means assigning key combinations with the digit block from 0 to 9; the AV button of the remote control could be assigned the plus key, the '-/--' button assigned the minus key, the Mute button assigned the key code of the Enter key, and so on. Now you can perform a simple calculation using the remote control. OK, it doesn't make a whole lot of sense to do it that way.
