Operation Manual

NOXON
If you would like to switch from Ethernet to WLAN, switch your NOXON off, unplug the power adapter and
the network cable, take a deep breath and hold it for a few seconds, reconnect the power adapter, and turn
the NOXON on! If a profile for a WLAN connection is already available, it will be used automatically. Other-
wise, the setup wizard for a new network connection will be launched, as you can see above.
For more information on WLAN setup, see page 22.
4.3 For deeper understanding: about routers, SSID, MAC & IPs
You will come across a number of the following topics automatically when integrating your NOXON. To-
gether with the glossary in the appendix, these brief explanations will give you a better understanding for
making decisions with regard to your network settings. A number of items are relevant only in connection
with wireless networks. We will continue with the actual configuration in “4.4 Before setup: network pro-
files”.
Setting up the router options
For this purpose, you must be sufficiently familiar with the router—or its administrator—to change its con-
figuration and understand its overall handling. Normally, these devices use Web interfaces for their admini-
stration. In other words, you only need to enter a specific address (e.g. 192.168.0.1) in your Web browser
for it to display a convenient user interface giving you access to all of the router's options.
As an example, an administration interface of a router.
18 ENGLISH