Operation Manual

Deutsch

English

Switching it on for the rst time

To start the NOXON, press the ON/OFF button on the NOXON itself marked with the

icon.

Setup wizard

Start now?

YES NO

After switching on the device, you enter the setup

wizard, which helps you set up your NOXON

A540.

Then, set the time format (12/24-hour).

The date and time follow. Set each of these using the navigation dial and conrm by

pressing the dial or the remote control. By the way, the date format is European – date

rst, then month. Then, you can decide on a WLAN region. Unless you are currently in

Spain or France, [Most of Europe] is the correct choice for Europeans.

And that’s all the information the setup wizard needs from you. It hands the baton over to

the network conguration wizard automatically.

The network conguration wizard

When switching it on for the rst time, the NOXON network device does not yet have

any information about the possible network environments from which it will be getting its

content. After switching it on for the rst time and selecting a language, the conguration

wizard will be displayed automatically.

As in all other menus of the NOXON, use the navigation dial to move through the selec-

tions. Conrm your selection by pressing the navigation dial.

The following chapter describes how to congure access, both for wired and wireless

network integration. If you are not satised with the way things are working after running

the Wizard, you can run it again by going to the main menu, selecting [Settings] and se-

lecting [Network] and then the network wizard in the following submenu.