Operation Manual

NOXON A540

Setup wizard

completed

Press SELECT to exit

If this is all successful, the network conguration

wizard displays the message “Setup wizard com-

pleted.” Now press the navigation dial to go to the

main menu.

Your entries are thus stored in the device and you do not have to repeat them. The next

time the A540 is switched on, it nds your router automatically and logs into the network

on its own.

Manual conguration

You have to select this entry if your router does not tell you the network name and you

have to enter it manually, or the router has no DHCP server and the IP address is to be

assigned as a xed address. The setup here is the same as that described under “Sce-

nario 1 – the wired connection”.

WPS – WiFi Protected Setup

Hidden behind this cryptic name is a standard for simply and securely setting up the

NOXON A540 in a network. Please note that your router must also support this protocol

in order for the connection to work.

Push Button Conguration:

WPS Setup

Push WPS

button at the

other end

Press SELECT to

continue

To use this type of connection setup, press the

WPS button (PBC) on your router and then “OK”

on your A540.

To congure your router, consult the correspond-

ing manual.