User guide

ManualsBrandsTerraWave ManualsHardwareTW-HC-MIMO

www.terrawave.com

Email: sales@terrawave.com Phone: 210-375-8482 Fax: 210-375-8382 10521 Gulfdale, San Antonio, TX 78216

Version 1.0 Page 1

TerraWave Solutions® 802.11n 20”x20”x8” MIMO Hard Cap Ceiling Enclosure

Detailed Product Specifications

TerraWave 20x20x8 MIMO Ceiling Tile Enclosure

Installed in Ceiling with Door Locked

Displayed with a TerraWave 2.4/5 GHz 2.5/4.5 dBi MIMO

Omnidirectional Antenna with RPTNC Connectors

TerraWave 20x20x8 MIMO Ceiling Tile Enclosure

Installed in Ceiling with Door Open

Displayed with a Cisco 1252 Access Point and a

TerraWave 2.4/5 GHz 2.5/4.5 dBi MIMO Omnidirectional

ntenna with RPTNC Connectors

Summary of content (8 pages)

PAGE 1
TerraWave Solutions® 802.11n 20”x20”x8” MIMO Hard Cap Ceiling Enclosure Detailed Product Specifications TerraWave 20x20x8 MIMO Ceiling Tile Enclosure TerraWave 20x20x8 MIMO Ceiling Tile Enclosure Installed in Ceiling with Door Locked Displayed with a TerraWave 2.4/5 GHz 2.5/4.5 dBi MIMO Omnidirectional Antenna with RPTNC Connectors Installed in Ceiling with Door Open Displayed with a Cisco 1252 Access Point and a TerraWave 2.4/5 GHz 2.5/4.
PAGE 2
Introduction TerraWave's 20” x 20” x 8” 802.11n multiple-input, multiple-output (MIMO) hard cap ceiling enclosure contains and protects an 802.11n MIMO access point (AP) in an aesthetically pleasing and stealthy solution within a hard cap ceiling, such as metal, sheet rock, stucco or wood. Once installed, the enclosure is conveniently secured and flush with the hard cap ceiling. This enclosure is specifically designed to support any TerraWave or Cisco 802.11n MIMO omnidirectional antenna.
PAGE 3
Features, Benefits and Important Information 1. Protects RF and networking equipment from theft and tampering. Tip: Universal mounting plate supports the Cisco 1252 AP and the Motorola 7131 AP. Includes selftapping screws and holes to mount a variety of other wireless equipment (reference Figure 1). Self-Tapping Screws Figure 1 Universal Back Plate Enclosure Installation Hardware 2. Clean, seamless design. 3. Constructed from 19-gauge steel. 4.
PAGE 4
5. Each enclosure door includes laser perforated punch-out holes to support the following types of antennas while hiding cables (reference Figure 3). o TIP: The inside of the door should be supported to prevent bending the door wall when knocking out the punch-out holes for each antenna. Figure 3 - Hole Usage Chart TIP: Remove ceiling tile clips on any TerraWave antenna that includes them so the antenna will lie flush once installed on enclosure door.
PAGE 5
• • • • • • • TerraWave 802.11n 2.4/5 GHz 2.5/4.5 MIMO Ceiling Mount Omni Antenna with RPSMA Plug Connectors (TESSCO SKU: 393746; TW Part Number: M6025045MO13620) TerraWave 802.11n 2.4 GHz 3 dBi MIMO Ceiling Mount Omni Antenna with RPTNC Plug Connectors (TESSCO SKU: 301552; TW Part Number: T24030MO13602) TerraWave 802.11n 2.4 GHz 3 dBi MIMO Ceiling Mount Omni Antenna with RPSMA Plug Connectors (TESSCO SKU: 363602; TW Part Number: T24030MO13620) Cisco 802.11n 2.
PAGE 6
• • TerraWave 4.9-5.8 GHz 2 dBi Surface Mount Omni—Black (TESSCO SKU: 450970; TW Part Number: T58010M11502B) TerraWave 4.9-5.8 GHz 2 dBi Surface Mount Omni—White (TESSCO SKU: 464926; TW Part Number: T58010M11502W) 6. Once the enclosure and AP are installed, the AP is protected and hidden from view, in a solution that is flush with the hard cap ceiling. 7. Installation Considerations A. Stage the Unit • Determine which antennas will be used and what punch-out holes in the door should be knocked out.
PAGE 7
C. Securing the Enclosure Tip: This enclosure is designed to be installed in a hard cap ceiling by two separate methods. Also, consider the positioning of the enclosure in relationship to the door swing for easy and convenient access to the contents inside the enclosure once installed and when opened. 1. Corners of Face Plate with Supplied 3/8” Toggle Bolts a. Installation requires cutting a 14.5” x 14.5” square hole in hard cap ceiling. b.
PAGE 8
2. Body of Enclosure with Customer Provided Bolts Tips: This method can be used if the customer has a hard cap ceiling with studs 16” on center. The inside of the enclosure body should be supported to prevent bending the body of the enclosure when knocking out the punch-out holes for each supporting stud bolt.