Übersicht .............................................................................. 3 Verwendung........................................................................4 Lieferumfang/Geräteübersicht ..........................................6 Allgemeines ......................................................................... 7 Bedienungsanleitung lesen und aufbewahren .................7 Zeichenerklärung .....................................................................7 Sicherheit.................
A 1 2 3 7 4 5 6
B 8 9 21 20 10 11 19 12 18 C USB 22 23 24 25 26 AC - 230V 50Hz 27 28 17 13 14 16 15
D 29 30 31 48 47 32 33 46 34 35 45 36 37 38 44 39 40 41 43 42 E 2 1 3 49 4 6
Lieferumfang 1 Gehäuse CDAnlage 25 Anschluss USB 2 CDFach 26 KopfhörerAnschluss 3 Gerätestecker 27 Ein/Ausschalter 4 Netzkabel 28 GerätesteckerAnschluss 5 Antennenkabel 29 Taste: Ein/Standby 6 Batterie 30 Taste: Stummschalten ein/aus 7 Fernbedienung 31 Tasten: Betriebsart CD, USB, FM, AUX/BT Geräteübersicht 8 Knopf: Ein/Standby 9 32 Taste: zufällige Wiedergabe SHUFFLE 33 Taste: Wiederholungsfunktion REPEAT 34 Taste: CDFach öffnen/schließen Knopf: Betriebsart 10 Knopf: Wiede
Allgemeines Allgemeines Bedienungsanleitung lesen und aufbewahren Diese Bedienungsanleitung gehört zu dieser CDMikroanlage (im Folgenden nur „Mikroanlage“ genannt). Sie enthält wichtige Infor mationen zur Inbetriebnahme und Handhabung. Lesen Sie die Bedienungsanleitung, insbesondere die Sicherheitshin weise, sorgfältig durch, bevor Sie die Mikroanlage einsetzen. Die Nichtbeachtung dieser Bedienungsanleitung kann zu schweren Verletzungen oder zu Schäden an der Mikroanlage führen.
Sicherheit Dieses Symbol kennzeichnet die Mikroanlage als Gerät der Schutzklasse II. Die Mikroanlage beinhaltet einen Laser der Laserklasse 1. Wiedergabe von MP3CDs Musikstreaming über Bluetooth® 3.0 + A2DP Zum Abspielen von MP3Audiodateien vom Wechseldatenträger (USB Sticks) Zum Anschluss externer Audiogeräte z. B.
Sicherheit Sicherheitshinweise WARNUNG! Stromschlaggefahr! Fehlerhafte Elektroinstallation oder zu hohe Netzspannung können zu elektrischem Stromschlag führen. − Schließen Sie die Mikroanlage nur an, wenn die Netzspannung der Steckdose mit der Angabe auf dem Typenschild überein stimmt. − Schließen Sie die Mikroanlage nur an eine gut zugängliche Steckdose an, damit Sie die Mikroanlage bei einem Störfall schnell von Stromnetz trennen können.
Sicherheit − Bei Reparaturen dürfen nur Teile verwendet werden, die den ursprünglichen Gerätedaten entsprechen. In dieser Mikroan lage befinden sich elektrische und mechanische Teile, die zum Schutz gegen Gefahrenquellen unerlässlich sind. − Verwenden Sie für den Betrieb der Mikroanlage ausschließlich das im Lieferumfang enthaltene oder durch den Hersteller spezifizierte Zubehör. − Halten Sie Feuchtigkeit von der Mikroanlage, dem Netzkabel, dem Netzstecker und der Fernbedienung fern.
Sicherheit − Verwenden Sie die Mikroanlage nur in Innenräumen. Betrei ben Sie sie nie in Feuchträumen oder im Regen. − Stellen Sie die Mikroanlage nie so auf, dass sie in eine Wanne oder in ein Waschbecken fallen kann. − Greifen Sie niemals nach der Mikroanlage, wenn sie ins Wasser gefallen ist. Ziehen Sie in einem solchen Fall sofort den Netz stecker. − Sorgen Sie dafür, dass Kinder keine Gegenstände in die Mikro anlage hineinstecken.
Sicherheit WARNUNG! Verätzungs- und Vergiftungsgefahr durch Batteriesäure! Ausgelaufene Batteriesäure kann zu Verätzungen führen. Wenn Kinder Batterien verschlucken, können die Batterien auslaufen und zu Vergiftungen oder zum Tode führen. Die mitgelieferte Fernbedienung beinhaltet eine Knopfzellen Batterie. Wird diese KnopfzellenBatterie heruntergeschluckt, kann sie innerhalb von 2 Stunden ernsthafte Verätzungen verur sachen, die zum Tod führen können.
Sicherheit WARNUNG! Gefahren für Kinder und Personen mit verringerten physischen, sensorischen oder mentalen Fähigkeiten (beispielsweise teilweise Behinderte, ältere Personen mit Einschränkung ihrer physischen und mentalen Fähigkeiten) oder Mangel an Erfahrung und Wissen (beispielsweise ältere Kinder).
Sicherheit VORSICHT! Gefahr von Hörschäden! Wenn Sie dauerhaft Musik oder Sprache in hoher Lautstärke hören, kann dies zu Hörschäden führen. − Vermeiden Sie das Hören bei großem Lautstärkepegel über einen längeren Zeitraum. − Halten Sie bei hohen Lautstärken immer einen gewissen Ab stand zu den Lautsprechern der Mikroanlage. Halten Sie Ihre Ohren niemals direkt an die Lautsprecher der Mikroanlage. − Wenn die Lautsprecher auf maximale Lautstärke eingestellt sind, kann ein sehr hoher Schalldruck entstehen.
Erstinbetriebnahme − Nehmen Sie bei längerer Abwesenheit die Batterie aus der Fernbedienung, um zu verhindern, dass die Batterie in der Fernbedienung ausläuft und diese beschädigt wird. − Bewegen Sie die Mikroanlage nicht, während Sie eine CD abspielen. Die Mikroanlage und die CD könnten beschädigt werden. − Stellen Sie sicher, dass sich keine CD im CDFach der Mikroanla ge befindet, wenn Sie die CDAnlage bewegen.
Erstinbetriebnahme Automatischen Installationsmodus starten Wenn Sie die Mikroanlage erstmalig oder nachdem sie vom Stromnetz getrennt war, in Betrieb nehmen, startet ein automatischer Installationsmodus. Dabei speichert die Mikroanlage automatisch alle empfangbaren Radiosender ab, liest mit Hilfe eines Radiosignals die aktuelle Uhrzeit aus und stellt diese ein. 1. Schließen Sie die Radioantenne an. Stecken Sie dazu den Stecker des beiliegenden Antennenkabels 5 in den Anschluss ANT 24 (siehe Abb. A und C).
Grundfunktionen Grundfunktionen Sie können den StandbyModus der Mikroanlage über die Taste 8 aktivieren oder deaktivieren. Knopf 29 bzw. den Fernbedienung verwenden Sie können die Mikroanlage bequem mit der beiliegenden Fernbedienung 7 bedienen. Beachten Sie dazu folgende Informationen: − Halten Sie die Fernbedienung zum Schalten in Richtung der Mikroanlage. − Beachten Sie, dass die Fernbedienung maximal 6 m von der Mikroanlage ent fernt sein sollte, wenn Sie die Mikroanlage mit ihr bedienen.
Grundfunktionen Stumm schalten − Drücken Sie die Taste 30 auf der Fernbedienung 7 , um die Wiedergabe stumm zu schalten (siehe Abb. D). In der Anzeige 11 blinkt MUTE, während die Wiedergabe stumm geschaltet ist. − Drücken Sie die Taste erneut, um die Wiedergabe in der zuvor gewählten Lautstärke fortzusetzen. Sie können die Stummschaltung ebenfalls deaktivieren, indem Sie die Tasten VOL+ bzw. VOL- 45 auf der Fernbedienung drücken oder den Lautstärke regler VOLUME 18 drehen.
Grundfunktionen Uhrzeit, Alarmfunktion und Schlummerfunktion Uhrzeit einstellen Wenn sich die Mikroanlage im StandbyModus befindet, wird die aktuelle Uhrzeit in der Anzeige 11 angezeigt. Um die Uhrzeit während der Wiedergabe anzuzeigen, drücken Sie die Taste CLOCK 41 auf der Fernbedienung 7 : Die Uhrzeit wird für einige Sekunden angezeigt. Gehen Sie für das Einstellen der Uhrzeit folgendermaßen vor: 1. Schalten Sie die Mikroanlage in den StandbyModus. 2.
Grundfunktionen Alarmzeit einstellen Um die Alarmfunktion nutzen zu können, muss die Uhrzeit korrekt eingestellt sein. Wenn Sie die Radioantenne angeschlossen haben und die Mikroanlage ein Radio signal empfängt, erfolgt die Einstellung der Uhrzeit in der Regel automatisch (siehe Abschnitt „Automatischen Installationsmodus starten“). 1. Schalten Sie die Mikroanlage für das Einstellen der Alarmzeit in den StandbyModus. 2.
Grundfunktionen Alarmfunktion aktivieren und deaktivieren − Drücken Sie 1× die Taste TIMER/SLEEP 40 auf der Fernbedienung 7 , während sich die Mikroanlage im StandbyModus beindet: In der Anzeige 11 werden nacheinander die eingestellten AlarmDetails ange zeigt und die Alarmfunktion ist aktviert. − Deaktivieren Sie die Alarmfunktion, indem Sie 2× die Taste TIMER/SLEEP auf der Fernbedienung drücken, während sich die Mikroanlage im StandbyModus beindet: Das Symbol wird nicht mehr angezeigt.
Wiedergabe Wiedergabe An der Mikroanlage muss der Modus eingestellt werden, um Musik oder Sprache vom gewünschten Quellgerät wiederzugeben. Wenn Sie die Mikroanlage einschalten, wird automatisch die zuletzt gewählte Quelle wiedergegeben. AUX-Anschluss verwenden Über den Anschluss AUX 23 können Sie ein externes Quellgerät mit Hilfe eines Ka bels an die Mikroanlage anschließen. Die Audiodateien werden dabei auf dem exter nen Quellgerät abgespielt und über die Mikroanlage wiedergegeben.
Wiedergabe USB-Modus verwenden Wenn Sie den USBModus auswählen und kein USBStick angeschlossen ist, erscheint in der Anzeige 11 NO USB. 1. Stecken Sie einen USBStick in den USBAnschluss 25 auf der Rückseite der Mik roanlage (siehe Abb. C). 9 an der Mikroanlage oder drücken Sie die 2. Drücken Sie wiederholt den Knopf Taste USB 31 auf der Fernbedienung 7 , um den USBModus auszuwählen. In der Anzeige wird USB angezeigt.
Wiedergabe Wiederholungsoptionen (REPEAT) − Drücken Sie wiederholt die Taste REPEAT 33 auf der Fernbedienung 7 oder den Knopf MODE 10 an der Mikroanlage, um eine Wiederholungsoption auszuwählen. In der Anzeige 11 erscheint: • RPT ONE: Der aktuelle Titel wird wiederholt. In der Anzeige wird angezeigt. • RPT ALL: Die komplette Titelliste wird wiederholt. In der Anzeige wird angezeigt. • RPT OFF: Die Wiederholung ist ausgeschaltet.
Wiedergabe Bluetooth®-Modus verwenden Die Funktechnik Bluetooth® ermöglicht es, zwischen Bluetooth®fähigen Geräten kabellos Daten auszutauschen. Sie können über diese Mikroanlage Audiodateien von einem Bluetooth®fähigen Quellgerät, wie z. B. einem Smartphone oder Tablet, abspielen. − Beachten Sie, dass der Abstand zwischen Mikroanlage und Bluetooth®fähigem Quellgerät maximal 8 m betragen darf, um eine Verbindung herstellen zu können.
Wiedergabe 3. Stellen Sie am externen Quellgerät die Verbindung mit MCD 264 her. Wenn die Geräte erfolgreich verbunden wurden, erscheint auf dem externen Quellgerät eine entsprechende Meldung, z. B. „VERBUNDEN“. 4. Falls Sie aufgefordert werden, am externen Quellgerät ein Passwort für die Herstellung der Verbindung einzugeben, geben Sie das Passwort 0000 ein.
Wiedergabe Sender automatisch speichern − Halten Sie die Taste PROG 42 auf der Fernbedienung 7 oder den Kopf PROG 19 an der Mikroanlage gedrückt. In der Anzeige 11 erscheint AUTO: Der automatische Sendersuchlauf wird ge startet. Alle verfügbaren Radiosender werden der Reihe nach gespeichert. Nach Abschluss des automatischen Sendersuchlaufs wird automatisch der zuerst gefundene Radiosender wiedergegeben. Sender manuell speichern 1. Stellen Sie den gewünschten Radiosender ein. 2.
Reinigung RDS-Informationen anzeigen RDS (Radio Data System) ist ein Service, der es Radiosendern erlaubt, zusätzliche In formationen zu senden. Wenn Sie einen Radiosender wiedergeben, der das RDSSig nal nutzt, erscheint z. B. der Name des Senders in der Anzeige 11 . Beim automatischen Sendersuchlauf werden Radiosender, die ein RDSSignal über mitteln, zuerst aufgeführt. 1. Wählen Sie einen Radiosender aus. Beachten Sie, dass nicht jeder Radiosender ein RDSSignal übermittelt. 2.
Aufbewahrung HINWEIS! Beschädigungsgefahr! Unsachgemäße Reinigung kann zu Beschädigung der Mikroanlage führen. − Verwenden Sie keine aggressiven Reinigungsmittel, Bürsten mit Metall oder Nylonborsten sowie keine scharfen oder me tallischen Reinigungsgegenstände wie Messer, harte Spachtel und dergleichen. Diese können die Oberflächen beschädigen. 1. Reinigen Sie die Mikroanlage mit einem leicht angefeuchteten, weichen Tuch. 2.
Fehlersuche Fehlersuche Fehler Mögliche Ursache und Abhilfe Die Mikroanlage lässt sich nicht einschalten. − Stellen Sie sicher, dass der Netzstecker in der Steckdose steckt. − Überprüfen Sie, dass der Gerätestecker richtig in dem Gerätestecker Anschluss 28 an der Rückseite der Mikroanlage steckt. − Stellen Sie sicher, dass der Ein/ Ausschalter 27 an der Rückseite der Mikroanlage auf I steht. Die Mikroanlage reagiert nicht auf die Fernbedienung.
Fehlersuche Fehler Mögliche Ursache und Abhilfe Die Uhrzeit wird nicht mehr angezeigt. − Wurde die Mikroanlage vom Stromnetz getrennt oder war sie ausgeschaltet (Ein/Ausschalter auf 0), muss die Uhrzeit anschließend neu eingestellt werden. Wenn das Antennenkabel angeschlossen ist und ein Radiosignal empfangen wird, nimmt die Mikroan lage diese Einstellung automatisch vor (siehe Kapitel „Automatischen Installa tionsmodus starten).
Technische Daten Technische Daten Modell: Versorgungsspannung: Musikleistung: Stromverbrauch bei Betrieb Stromverbrauch im StandbyModus: Schutzklasse: Laserklasse: UKWRadio: Unterstützte AudioFormate: Anschlussmöglichkeiten: Gewicht: Abmessungen (B × T × H): Reichweite Fernbedienung: Artikelnummer: MCD 264 230 V~/50 Hz 2 × 25 W 50 W <1 W II 1 87,5–108 MHz AudioCD, MP3 USB 2.0 (max. 64 GB FAT32), AUX IN (2 × Cinch), Bluetooth® (3.0 + A2DP), AntennenAnschluss (75 Ohm), Kopfhörer (3,5 mm Klinke) ca.
Entsorgung Entsorgung Verpackung entsorgen Entsorgen Sie die Verpackung sortenrein. Geben Sie Pappe und Karton zum Altpapier, Folien in die Wertstoffsammlung. Mikroanlage entsorgen (Anwendbar in der Europäischen Union und anderen europäischen Staaten mit Sys temen zur getrennten Sammlung von Wertstoffen) Altgeräte dürfen nicht in den Hausmüll! Sollte die Mikroanlage einmal nicht mehr benutzt werden können, so ist jeder Verbraucher gesetzlich verpflichtet, Altgeräte getrennt vom Hausmüll, z. B.
DE Importiert durch: GLOBALTRONICS GMBH & CO. KG DOMSTRASSE 19 20095 HAMBURG GERMANY KUNDENDIENST DE 46503 0800 - 5000 136 (kostenfreie Hotline) www.gt-support.
DE GARANTIEKARTE CD-MIKROANLAGE Ihre Informationen: Name: Adresse: EMail¹: Datum des Kaufs* *Wir empfehlen, Sie behalten die Quittung mit dieser Garantiekarte. ¹ für Statusmeldungen zur Reparatur Ort des Kaufs: Beschreibung der Störung: Schicken Sie die ausgefüllte Garantie karte zusammen mit dem defekten Produkt an: KUNDENDIENST DE Breitefeld 15 64839 Münster 0800 - 5000 136 (kostenfreie Hotline) Globaltronics Service Center c/o Teknihall Elektronik GmbH 46503 www.gt-support.
DE Garantiebedingungen Sehr geehrter Kunde! Die ALDI Garantie bietet Ihnen weitreichende Vorteile gegenüber der gesetzlichen Gewährleistungsplicht: Garantiezeit: Kosten: Hotline: TIPP: 3 Jahre ab Kaufdatum 6 Monate für Verschleiß und Verbrauchsteile bei normalem und ordnungsgemäßem Gebrauch (z. B. Akkus) Kostenfreie Reparatur bzw. Austausch oder Geldrückgabe Keine Transportkosten Kostenfreie Hotline Bevor Sie Ihr Gerät einsenden, wenden Sie sich telefonisch, per Mail oder Fax an unsere Hotline.