User's Manual

User Manual for Tersus RS460HH Radio v1.0
13
Open the radio configuration software ‘TersusRadio Config Tool’ obtained from
Tersus support. Ensure the port is selected correctly, then click [Connect].
3) Read
After the connection is successful, click the [Read] button to read all the
configuration information.
4) Write
After the connection is successful, click the [Write] button to write all the
configuration information. (Note: SN, PN, and firmware versions are read-only
and cannot be written. Other parameters can be configured according to
customer needs).
5) Frequency Setting
Click the [Default] button to set all frequencies to the default values.
6) Transmode Setting
If the box before [Reset to receive when reboot] is checked, the radio will be in
the receiving mode after it is rebooted. Uncheck it, the radio will be in the
transmit mode after it is rebooted. Remember to click [Write] to make this
configuration effective.
Note: Transmode Setting function is only available for the firmware