User's Manual

User Manual for Tersus RS460HH Radio v1.0
16
Figure 2.4 Update successful interface
2.4 Installation Tips
2.4.1 Radio installation
As a transmission, the radio is hooked on a tripod; as a rover station, the radio
is installed in the rover station bracket.
(1) Large amount of heat would be generated when the radio is in
transmission. When the radio is working, please do not place the radio in poor
ventilated box, wrap or cover any item on the surface of the radio.
(2) In an environment with a high temperature of more than 40 °C or
intense sunlight, the surface of the radio would be hot when it is transmitting at
high power. It may cause scald if the surface of the machine is touched directly.
Please pay special attention.