Datasheet

productinformation
Page 1 of 1 - As of 14/05/2019 - en
For latest information on this product please visit http://l.tesa.com/?ip=53988
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical
information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered
as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not
limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa®
product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical support staff will be
glad to support you.
tesa® Professional 53988
tesaflex 53988 Soft PVC Insulation Tape, certified according to IEC 60454-3-1 / 5 Norm
The electric insulation tape tesaflex 53988 is a reliable helper for electricians, mechanics and other handymen. It is
characterized by its relatively thick base material, a high degree of flexibility and a very good adhesive performance (even on
steel and at low temperatures). The PVC insulation tape is not only suited for insulating and marking wires but also for repairs
and bundling. Since it is available in many colors – red, blue, brown, black, white, gray, green, yellow and yellow-green -, it can
also be used as a marking adhesive tape. tesaflex 53988 is certified according to all relevant standards and can be used easily.
Main Application
▪ Ideally suited for electrical applications, e.g. insulating or marking wires
▪ Certified according to IEC 60454-3-1 (VDE, IMQ, SEMKO), VOC-certified, RoHS 2.0 and REACH conform
▪ Thick backing material (150 μm)
▪ High dielectric breakdown voltage (7.000 V)
▪ Heat-resistant up to +90° C
▪ Available in many different colors and dimensions
Technical Data
▪ Backing material soft PVC
▪ Total thickness 150 µm
▪ Type of adhesive natural rubber
▪ Adhesion to steel 2.2 N/cm
▪ Elongation at break 240 %
▪ Tensile strength 25 N/cm
▪ Temperature resistance 90 °C
▪ Dielectric breakdown voltage 7000 volt