Datasheet
tesa�SE tesa�tape�inc.
tesa�tape�Asia
Pacific�Pte.�Ltd.
Quickbornstraße�24
20253�Hamburg
Germany
Phone:�+49�(40)�4909�101
http://www.tesa.com
5825�Carnegie�Boulevard
Charlotte,�N.C.�28209
United�States�of�America
Phone:�+1�(704)�554�0707
Fax:�+1�(704)�553�5634
http://www.tesatape.com
164�Gul�Circle,
Singapore�629621
Phone:�+65�(68)�612�026
Fax:�+65�(68)�614�790
http://www.tesa-asia.com
tesa®� products� prove� their� impressive� quality� day� in,� day� out� in� demanding
conditions� and� are� regularly� subjected� to� strict� controls.� All� information� and
recommendations�are�provided�to�the�best�of�our�knowledge�on�the�basis�of�our
practical�experience.�Nevertheless�tesa�SE�can�make�no�warranties,�express�or
implied,�including,�but�not�limited�to�any�implied�warranty�of�merchantability�or
fitness�for�a�particular�purpose.�Therefore,�the�user�is�responsible�for�determining
whether�the�tesa®�product�is�fit�for�a�particular�purpose�and�suitable�for�the�user’s
method�of�application.�If�you�are�in�any�doubt,�our�technical�support�staff�will�be
glad�to�advise�you.
tesa
®
�64958
Double-sided�PE�foam�mounting�tape
PRODUCT�INFORMATION
Product�Description
tesa
®
�64958�is�a�white�double-sided�tape�for�general�mounting�with�a�PE-foam�backing�and�a�synthetic�rubber�adhesive.
tesa
®
�64958�features�especially:
• Highly�conformable�PE-foam
• High�immediate�bonding�strength�even�on�rough�or�uneven�surfaces
• High�bonding�strength�at�low�mounting�pressure
• High�bonding�strength�on�low�surface�energy�substrates
Main�Application
• Construction�of�POS-displays
• Mounting�of�indoor�signs�and�posters
• Mounting�of�shelf�edge�labelling�systems
• Additional�dampening�and�anti-rattle
Technical�Data
Backing�material PE�foam
Colour white
Total�thickness 1050�µm
Type�of�adhesive synthetic�rubber
Elongation�at�break 200�%
Tensile�strength 7�N/cm
Type�of�liner glassine
Thickness�of�liner 70�µm
Colour�of�liner yellow
Weight�of�liner 80�g/m²
Adhesion�to
Steel�(initial) 4.0�N/cm
PC�(initial) 4.0�N/cm
PE�(initial) 4.0�N/cm
PET�(initial) 4.0�N/cm
PP�(initial) 4.0�N/cm
PVC�(initial) 4.0�N/cm
Steel�(after�14�days) 4.0�N/cm
PC�(after�14�days) 4.0�N/cm
PE�(after�14�days) 4.0�N/cm
PET�(after�14�days) 4.0�N/cm
PP�(after�14�days) 4.0�N/cm
PVC�(after�14�days) 4.0�N/cm
Properties
Temperature�resistance�short�term 60�°C
Temperature�resistance�long�term 40�°C
Tack +
Ageing�resistance�(UV) o
Humidity�resistance +
Resistance�to�chemicals o
Softener�resistance o
Static�shear�resistance�at�23°C ++
Static�shear�resistance�at�40°C o
Evaluation�across�relevant�tesa
®
�assortment:�++�very�good,�+�good,�o�medium,�-�low
For�latest�information�on�this�product�please�visit�http://l.tesa.com/?ip=64958
Page�1�of�2�/�As�of��09/22/13