User Guide T70 Digital picture frame
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. IMPORTANT SAFETY INFORMATION Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a slightly damp lint free cloth. Do not block any ventilation openings.
INTRODUCTION UNPACKING Your Digital Picture Frame (DPF) enables you to view digital pictures from either a memory card or from a USB drive. The DPF is compatible with the following card formats: SD™ (Secure Disk), MMC™(Multimedia Card), and MS™ (Memory Stick). The Frame will also support a USB 2.0 or 1.1 drive. The box should contain: • The Picture Frame • External Power Adapter • Stand • User Guide If any items are missing or damaged, contact your nearest TESCO store for a replacement.
FITTING THE STAND Locate the stand in the slot at the rear. Rotate the stand once to put the frame into horizontal (landscape) view. Rotate once more to put the frame into vertical (portrait) view. Stand the frame on a level solid surface where it is unlikely to fall or get knocked over. WALL MOUNTING As an alternative the frame can be wall mounted via the slots in the rear of the frame. a ?b Use the two holes annotated a (78mm apart) to mount the DPF in the horizontal (landscape) view.
CONTROLS AND FUNCTIONS e a b c h f d g i 1 2 3 4 5 SD/MMC/MS-card slot USB slot 5V DC Input socket [ ] Right/Next button [ ] Up button; Back to preview while playing a slideshow 6 [ ] Previous/Left button 1) 7 [ ] Down button; Rotate photo while playing a slideshow 8 [] Play/Pause; Confirm/Enter; hold to enter main menu 9 On/Off switch 10 Stand Page 5
GETTING STARTED CONNECTING THE POWER SUPPLY If the DPF is being switched on for the first time, or after a default setting reset, you must first select a display language. Use the ( ) or ( ) buttons to make your selection and press the () button to confirm. Plug the DC power jack of the adapter into the DC socket in the DPF. Plug the power adapter into the mains socket. Switch on at the mains. Switch the ON /OFF switch to the ON position.
INSTALLING A USB DEVICE OR MEMORY CARD To insert a memory card. Position the card with the cropped corner facing down and press gently in. To release a memory card. Grip both sides of the card and gently pull out. When first switched on the pictures will display as a Slide Show. Thereafter the display will depend on the setup you have customised. NOTES: You should only insert one media source at any time.
VIEWING PHOTOS Main menu In the main menu, you can select the connected memory device to view photos, change frame settings, or play the photos immediately. 1 When pictures are being displayed press and hold the () button to access the main menu. In this menu Connected sources (USB or Card), “Setup” and “Now Playing” icons are displayed. USB 2 Use the ( ) or ( ) buttons to navigate between the options in the main menu. Press the () button to confirm or enter the selected submenu.
Playing a slideshow There are two ways of playing a slideshow: 1 Press the ( ) or ( ) buttons to select a memory device (USB or SD/MMC/MS card) in the main menu, and then press the () button. The DPF will start a slideshow from the memory device connected. 2 Press the ( ) or ( ) buttons to select Now Playing in the main menu, and then press the () button. The DPF will start a slideshow from the memory device connected..
• To rotate a photo, highlight ( ) and press the () button repeatedly. • To return to thumbnail mode, highlight ( ) and press the () button. • To zoom in a photo, highlight and press the () button repeatedly, the options are: X2, X4, X8 and X16. Viewing thumbnails 1 While playing a slideshow or viewing a single photo, you can use the ( ) button to enter preview (thumbnail mode). Up to 12 photos are displayed at a time.
Setting items Setting Items Description Hint time Set the interval time for slideshow The available options are: 3s, 5s, 15s, 1 min, 15mins, 1 hour. Set how long to display the button operation window while in slideshow mode. The available options are: 0s, 5s, 15s, 20s. Photo mode Slideshow shuffle To play photos in a random order or in order while playing a slideshow. Set photos to Full mode or Standard mode when you are viewing them. Default settings Reset all settings to the default settings.
After Use Switch the set off via the POWER switch. Unplug the adaptor from the mains and then unplug the adaptor from the DPF. Unplug any memory card or USB stick. Store the unit and power adaptor in a cool dry place, out of the reach of children and pets. Further Information The screen resolution is 480x234 pixels. This is a total resolution of 112,500 pixels (0.125MP). High resolution pictures will slow loading times without improving viewability. After extended use, the frame may get warm.
