Owner's Guide
Table Of Contents
- Contents
- Overview
- Opening and Closing
- Seating and Safety Restraints
- Driving
- Autopilot
- Using the Touchscreen
- Charging
- Maintenance
- Maintenance Schedule
- Tire Care and Maintenance
- Cleaning
- Wiper Blades and Washer Jets
- Fluid Reservoirs
- Jacking and Lifting
- Parts and Accessories
- Specifications
- Roadside Assistance
- Consumer Information
- Index
• HomeLink (if applicable in your market
region) is not accessible.
• Driver Profiles are not accessible.
• The touchscreen does not display the list
of keys that can access Model 3 (see
Managing Keys on page 10).
• Wi-Fi and Bluetooth are disabled. When
Model 3 is in Valet mode, you cannot pair
new Bluetooth devices or view or delete
existing paired devices.
Note: If a Bluetooth paired device or a
known Wi-Fi network is within operating
range (approximately 9 meters) of Model
3 in Valet mode, Model 3 will connect to it.
Starting Valet Mode
With Model 3 in Park, touch the driver profile
icon on the top of the touchscreen, then touch
Valet Mode.
The first time you enter Valet mode, you will
be prompted to create a 4-digit PIN that you
will use to cancel Valet mode.
When Valet mode is active, the touchscreen
displays the word Valet above the driving
speed and the Valet mode driver profile
displays on the touchscreen.
You can also use the mobile app to start and
cancel Valet mode (provided Model 3 is in
Park). When using the mobile app, you do not
need to enter a PIN because you are already
required to log into the app using your Tesla
Account credentials.
Note: If the PIN to Drive setting is enabled
(see PIN to Drive on page 115), you must enter
the driving PIN before you can define or enter
a Valet PIN. Once in Valet mode, Model 3 can
be driven without the valet needing to enter
the driving PIN.
Note: The PIN to Drive setting is not available
when Valet mode is active.
If you forget your valet PIN, reset it from
inside Model 3 by entering your Tesla Account
credentials (which also cancels Valet mode).
You can also reset your PIN using the mobile
app.
Canceling Valet Mode
With Model 3 in Park, touch the Valet Mode
driver icon on the touchscreen's status bar,
then enter your 4-digit PIN.
When you cancel Valet mode, all settings
associated with the most recently used driver
profile and climate control settings are
restored, and all features are available.
Note:
You do not need to enter a PIN to cancel
Valet mode from the mobile app.
Driver Profiles
Driving 41