Owner’s Manual
3. If applicable, disconnect the bumper
sensors.
If Model S is equipped with Autopilot
components (see About Driver Assistance
on page 65), you also need to disconnect
the cords for the ultrasonic sensors. To do
so, press down on the tab and pull to
release.
4. Insert the towing eye.
Fully insert the towing eye into the
opening on the right side, then turn it
counter-clockwise until securely fastened.
5. Attach the winch cable to the towing eye.
Caution: Before pulling, make sure the
towing eye is securely tightened.
Pull Onto the Trailer and Secure the
Wheels
Secure wheels using the eight-point tie-down
method with basket straps or tie-down straps:
• Ensure any metal parts on the tie-down
straps do not contact painted surfaces or
the face of the wheels.
• Do not place tie-down straps over body
panels or through the wheels.
Caution: Attaching tie-down straps to the
chassis, suspension or other parts of the
vehicle's body may cause damage.
Caution: To prevent damage, do not
transport Model S with the tires directly
on the ground.
Instructions for Transporters
Roadside Assistance 177