User Manual
Table Of Contents
- IMPORTANT SAFETY INFORMATION
- PRODUCT OVERVIEW
- INSTALLATION
- In the Box
- Tools
- Installation Considerations
- Step 1: Prepare Wirebox for Conduit Fittings and Bushings
- Step 2: Prepare Mounting Surface
- Step 3: Prepare Wirebox and Mount to Wall
- Step 4: Route Wiring Through Wirebox
- Step 5: Strip and Land Wiring
- Step 6: Attach Wall Connector to Wirebox
- Step 7: Energize Wall Connector
- COMMISSIONING PROCEDURE
- POWER SHARING
- WALL CONNECTOR LEDS
- WARRANTY INFORMATION
- _
WARNING: Do not touch the Wall Connector’s end terminals with fingers or sharp metallic objects,
such as wire, tools, or needles.
WARNING: Do not insert fingers or foreign objects into any part of the Wall Connector.
WARNING: Do not forcefully fold or apply pressure to any part of the Wall Connector or damage it
with sharp objects.
WARNING: Use of the Wall Connector may aect or impair the operation of any medical or
implantable electronic devices, such as an implantable cardiac pacemaker or an implantable
cardioverter defibrillator. Check with your electronic device manufacturer concerning the eects that
charging may have on such electronic devices before using the Wall Connector.
IMPORTANT SAFETY INFORMATION
3Gen 3 Wall Connector Manual