Datasheet

TESLA BLATNÁ, a.s., Palackého 644, 388 15 Blatná, Czech Republic
Phone: [phone], E-mail: [e-mail]
BLATNÁ, a.s.
aaaaaa.s.
Multi-Sensor-Platform KBI2
The sensor platform is designed for the mounting of heated sensors. Using heat resistance the
chip can be kept at a constant temperature or a temperature cycle can be operated. The
platform integrates a temperature sensor (Pt 1000), a heater and interdigitated electrode
structures (IDES) in platinum thin film on a ceramic substrate. Heater and sensor are covered
with an insulating glass layer. Sensitive layers can be applied onto the non-passivated
electrode structures by using screen process or drop-coating. That way the Multi-Sensor-
Platform is converted into gas sensors, humidity sensors etc.
Application: Typical areas of application for the sensor platform
are any type of gas sensors and physical sensors.
Connection: Ag wire ø 0,25 mm
Lead length: 10 ± 1 mm (Custom specification)
IDES: Line / Gap: 15 μm / 15 μm
Temperature range: -200 °C to +350 °C
Nominal resistance Temperature sensor 1000 Ω at 0 °C
and tolerance R
0
: Class 2B (F 0,6) according to
DIN EN 60 751
max. measuring current 0.3 mA
Heater: 8 Ω ± 1,5 Ω at 0 °C
Heating input 3 W at 200 °C
Long-term stability: Test 1000 hours at 200 °C
Advantages: Small size
Long-term stability
Short response time