User Manual

1.Setup the connection according to the connection diagram.
2.After all the PCs are started in step 1, then you can switch to any
PC by keyboard hot keys, IR keys or the key pad on the KVM
front panel. (For example, if you want to control the PC connected
to HDMI Input 2 just press the "Select" button on front panel, or
press digit button [2] on remote control, or the keyboard hotkey
commands described following)
1. Hit [Scroll Lock] key twice within 2 seconds, the buzzer will beep
once when [Scroll Lock] is pressed the second time .
2. After step 1 enter following hot key commands within 3 seconds,
the KVM will execute the corresponding commands.