User manual

TT-HVP 2739 High-Frequency High Voltage Probe
E-7
WARNING, RISK OF DANGER!
(1) The TT-HVP 2739 adjustment holes 2 and 3 are for the
qualified engineer only.
(2) Before adjusting hole 2 and hole 3, please move off the
plastic cover at first.
(3) Use the supplied adjust bar only.
(4) When the measured frequency is over 40MHz or to adjust the
bandwidth (hole 3), you must use the short earth lead and
connect it to the alligator clip to obtain the best frequency
response.
(5) When the measured voltage is over 25kV, please connect
TT-IH 2739 to the probe, to meet the regulations of
2006/95/EC Directive IEC/EN 61010-31:2002 + A1:2008
TT-IH 2739 high-voltage isolation head
TT-IH 2739
connected to TT
-
HVP 2739