User manual

AC/DC Oscilloscope Current Probes TT-CC Series
E-4
English
3. Important Safety Instructions
Please read the following safety instructions thoroughly to avoid
personal injury and prevent damage to this product or any products
connected to it. Use this product only as specified.
Only qualified personnel should perform service procedures.
3.1 Avoid Fire or Personal Injury
Connect and disconnect properly! Connect the probe output to the
measurement instrument before connecting the probe to the circuit under test.
Disconnect the probe input and the probe ground from the circuit under test
before disconnecting the probe from the measurement instrument.
Observe all terminal ratings! To avoid fire or shock hazard, observe all
rating and markings on the product. Consult the instruction manual for further
ratings information before making connections to the product.
Replace batteries properly! Replace batteries only with the proper type and
rating specified.
Do not operate without covers! Do not operate this product without the
covers or panels.
Avoid exposed circuitry! Do not touch exposed connections and
components when power is present.
Do not operate with suspected failures! If you suspect there is damage to
this product, have it inspected by qualified service personnel.
Do not operate under wet or damp conditions!
Do Not Operate in an explosive atmosphere!
Keep product surfaces clean and dry.