Data Sheet
Technical data subject to change
info@testec.de
© Testec Elektronik GmbH 2020 www.testec.de
ACTIVE DIFFERENTIAL PROBES SERIES 8000
The
new
TT-SI 8010A and TT-SI 8010B active differential probes allow safe, accurate high voltage
measurements between two voltage points where neither point is referenced to ground. These two probes are
perfect designed for a wide variety of measurements up to 100MHz / ±7000V and are compatible
with oscilloscopes from all major manufacturers.
TT
-
SI
80
10A
TT
-
SI 8
010B
Order Number
154
11
1541
2
Bandwidth
70
MHz
10
0MH
z
Attenuation
x
100 / x1000
DC
-
Accuracy
±2%
Max. Input Voltage
Differential Mode
±
700
V (DC + AC peak)
@ x
10
±7000V (DC + AC peak) @ x100
Max. Input Voltage
Common Mode
±7000V (DC + peak AC)
Maximum Input Voltage
(each side to ground)
1000
Vrms CAT III
2300Vrms
Safety Standard
IEC1010
-
031:2015
Supplied Accessories
2 x Test Leads with insulated 4mm Banana Plugs (red & black)
2 x Grabber (red & black), 2 x Pincer (red & black)
2 x Alligator Clips (red & black), 1 x Insulated BNC Cable, 100cm
1 x USB power lead, 1 x Mains Adapter 220V EU Version