Datasheet

TT-SI 50 TT-SI 51 TT-SI 200
Order Number 15130 15131 15135
Bandwidth
DC to 50MHz (-3dB) DC to 50MHz (-3dB) DC to 200MHz (-3dB)
Attenuation Ratio
1:10 1:100 1:10
Accuracy
±1% ±1% ±1%
Rise Time
‹ 7ns ‹ 7ns 1,75ns
Input Impedance
1,6MΩ // 7pF each side to ground 4MΩ // 7pF each side to ground 500kΩ // 7pF each side to ground
Input Voltage
– Differential Range
– Common Mode Range
– Absolute max. Voltage
(either inputs to ground)
±70V (DC + peak AC) or 70Vrms
±700V (DC + peak AC) or 600Vrms
±700V (DC + peak AC) or 600Vrms
±700V (DC + peak AC) or 600Vrms
±1400V (DC + peak AC) or 600Vrms
±1400V (DC + peak AC) or 600Vrms
±20V (DC + peak AC or rms)
±60V (DC + peak AC or rms)
±60V (DC + peak AC or rms)
Overvoltage Category
CAT I CAT I CAT I
Output
– Swing
– Offset (typical)
– Noise (typical)
– Source Impedance (typical)
±7V (into 5kΩ load)
‹ ±2mV
0,7mVrms
50Ω
±7V (into 5kΩ load)
‹ ±1mV
0,3mVrms
50Ω
±2V (into 50Ω load)
‹ ±2mV
0,3mVrms
50Ω
CMRR (typical)
-95dB @ 60Hz, -60dB @ 1MHz -90dB @ 60Hz, -55dB @ 1MHz -80dB @ 100Hz, -50dB @ 10MHz
Technische Änderungen vorbehalten | All specifi cations and characteristics are subject to change without notice
Power requirements (optional): removeable battery pack (4 x AA Cells) or Mains Adaptor 6VDC/90mA or regulated 9VDC/70mA
Dimensions: (L x W x H) 111mm x 22mm x 14mm
Length: BNC Cable 125cm - Input Leads 50cm
Weight: 300g
Type
Specifi cations
Mitgeliefertes Zubehör /
Supplied Accessories
Aktive Differential-Tastköpfe Active Differential Probes
TT-SI 50 TT-SI 51 TT-SI 200
Empfohlenes Zubehör / Optional Accessories
Version
RA
RA = automatische Teilungsfaktor-Erkennung / Readout-Actuator
Version RA auf Anfrage / Version RA on request