User Manual

4. Installation

a. Simply plug-in the BNC output connector to the vertical input of a general purposed

oscilloscope or other measurement instrument, and connects the auxiliary grounding

terminal to a proper ground. The measurement instrument must have a ground referenced.

b. Connect an appropriate power source (mains adaptor, battery pack or power lead) to this

probe and then turn it on.

WARNING. To protect against electric shock, use only the

accessories supplied with this probe.

c. Using the appropriate probe accessories, connect the inputs to the circuits under

measurement.

CAUTION. This probe is to carry out differential measurement

between two points on the circuit under measurement.

This probe is not for electrically insulating the circuit

under measurement and the measuring instrument.

5. Appearance

The differential probe looks as follows.