Datasheet

TT-SI 9010 A
Order Number 15108
Bandwidth
DC to 70MHz (-3dB)
Attenuation Ratio
1:100 / 1:1000
Accuracy
±2%
Rise Time
5ns
Input Impedance
50MΩ // 7pF each side to ground
Input Voltage
– Differential Range
– Common Mode Range
– Absolute max. Voltage CAT III
(Differential or Common Mode)
1:100 ±700V (DC + peak AC) or 700Vrms
1:1000 ±7000V (DC + peak AC) or 5000Vrms
1:100 ±7000V (DC + peak AC) or 5000Vrms
1:1000 ±7000V (DC + peak AC) or 5000Vrms
1:100 ±7000V (DC + peak AC) or 5000Vrms
1:1000 ±7000V (DC + peak AC) or 5000Vrms
Overvoltage Category
CAT I
Output
– Swing
– Offset (typical)
– Noise (typical)
– Source Impedance (typical)
±1,4V (into 50kΩ load)
‹ ±5mV
0,9mVrms
50Ω
CMRR (typical)
-80dB @ 50Hz, -60dB @ 20kHz
Technische Änderungen vorbehalten | All specifi cations and characteristics are subject to change without notice
Power requirements: 4 x AA Cells or Mains Adaptor 6VDC/200mA or regulated 9VDC/120mAA
Dimensions: (L x W x H) 202mm x 83mm x 38mm
Length: BNC Cable 90cm - Input Leads 60cm
Weight: 500g
Aktiver Differential-Tastkopf Active Differential Probe
TT-SI 9010 A
Mitgeliefertes Zubehör /
Supplied Accessories
Type
Specifi cations