Install Instructions

6 Using the App
10
6 Using the App
6.1. Overview of operating controls
1 Choice of applications.
2 Display of connected Smart Probes.
3 Switch between the views (list, graphic diagram, table)
4 Measurement settings. (The menu changes depending on
the Smart Probe connected and the application selected)
5 Restarts the measuring value recording in graph and table
format.
6 Export the readings.
7 Options menu
6.2. App options
6.2.1. Set “Language”
1. Tap -> Settings -> Language.
- A selection list is displayed.
2. Tap the required language.
- The selected language receives a green check mark.
3. Tap ◄ several times until the measurement view is displayed.
- The language has been changed.