Brochure

7
The Smart Probes refrigeration
set: 2x testo 549i and 2x testo
115i in the testo Smart Case.
The Smart Probes VAC set: testo
405i, testo 410i, testo 605i and
testo 805i in the testo Smart
Case.
The Smart Probes heating set:
testo 115i, testo 510i and testo
805i in the testo Smart Case.
Smart sets for air conditioning,
refrigeration and heating technicians.
Order no. 0563 0002 Order no. 0563 0003 Order no. 0563 0004
The refrigeration set is ideally suited
to service and error detection on
air conditioning and refrigeration
systems, as well as their installation.
The robust testo Smart Case enables
the measuring instruments to be
conveniently transported and means
that they are always to hand when
they are needed.
- Low refrigerant loss thanks to
hoseless application
- Quick and easy installation directly
onto the pressure connection
- Simplifies work on systems with far
apart measurement locations
- Automatic calculation of the
evaporation and condensation
temperature via the testo Smart
Probes App
- Calculation of system parameters
– such as superheating – on
refrigeration systems, via testo Smart
Probes App.
- Measurement data analyzed and sent
via testo Smart Probes App
- Practical testo Smart Case for
stowing and transport
With the VAC set, you can measure air
velocities, humidity, volume flows and
temperatures in, on and in connection
with air conditioning units systems.
The robust testo Smart Case enables
the measuring instruments to be
conveniently transported and means
that they are always to hand when
they are needed.
- Easy parameterization of the outlet/
duct cross-section
- Listing of several volume flows and
calculation of the total volume flow
(in the report)
- Identification of mould danger
through combined use of the testo
605i and testo 805i
- Fast image documentation with IR
temperature measurement values
and measurement spot marking
- Measurement data analyzed and sent
via testo Smart Probes App
- Practical testo Smart Case for
storage and transport
With the heating set, you measure and
check all temperatures and pressures
in a heating system. The robust testo
Smart Case enables the measuring
instruments to be conveniently
transported and means that they are
always to hand when they are needed.
- Measurement of gas flow pressure
and static pressure
- Measurement of the flow and return
temperatures at distributors
- Measurement of the temperatures of
underfloor heating and radiators
- Measurement menu for pressure-
drop test incl. alarms
- Fast image documentation with IR
temperature measurement values
and measurement spot marking
- Measurement data analyzed and sent
via testo Smart Probes App
- Practical testo Smart Case for
stowing and transport