User manual

5. Operation26
4
To sset tthe ggrill ffactor: KK.FACT ((only iif
F.Fact oFF)
:
If parts of the cross-sectional area are covered (e.g.
by grill members), this can be corrected via the grill
factor. The grill factor indicates the proportion of free
space on the cross-sectional area. Example: If 20% of
the area is covered, the grill factor must be set to 0.8
(80% free space)
 Configuration mode is opened, K.FACT is lit.
i Set the grill factor with / and confirm with
.
5
To sset AAuto OOff:
 Configuration mode is opened, AutoOff is flashing.
i Select the desired option with / and confirm
with :
· on: The measuring instrument switches off
automatically if no button is pressed for 10min (Hold
or Auto Hold is lit).
· oFF: The measuring instrument does not switch
itself off automatically.
6
To sset tthe uunit oof mmeasurement:
 Configuration mode is opened, UNIT is lit.
i Select the desired unit of measurement with /
and confirm with .
7
To rreset:
 Configuration mode is opened, RESET is lit.
i Select the desired option with / and confirm
with :
· no: Instrument is not reset.
·Yes: Instrument is reset. The instrument is reset to
the factory settings.
- The instrument returns to measurement view.