User manual

6. Measuring 27
6. Measuring
This chapter describes the steps that are required to
perform measurements with the product.
²
Taking aa mmeasurement:
 The instrument is switched on and is in measurement
view.
i Put the probe in position and read off the readings.
²
Changing tthe mmeasurement cchannel ddisplay:
i To change between displaying the temperature (°C)
and the calculated volumetric flow rate (m
3
/h):
Press .
²
Holding tthe rreading, ddisplaying tthe mmaximum/minimum
value:
The current reading can be recorded. The maximum and
minimum values (since the instrument was last switched
on) can be displayed.
i Press several times until the desired value is
displayed.
- The following are displayed in turn:
· Hold: the recorded reading
· Max: Maximum value
· Min: Minimum value
· The current reading
²
Resetting tthe mmaximum/minimum vvalues:
The maximum/minimum values of all channels can be
reset to the current reading.
1 Press several times until Max or Min lights up.
2 Press and hold (approx. 2s).
- All maximum or minimum values are reset to the
current reading.
de
en
fresitptsvnl????