Testo USB driver Windows XP, Vista and Windows 7 Application information en
General information General information Please take the time to read the Installation Instructions through carefully and make sure you become familiar with how the device operates before using it. Always keep this document close to hand for reference purposes. Symbols Symbol Meaning Remarks Information Please pay particular attention to..... Font style - Terms which you will find on the screen are written in italics.
Contents 3 Contents General information ............................................................2 Contents ............................................................................3 1. Licence agreement ........................................................4 2. Installation ......................................................................5 3. Virtual COM port settings ................................................6 4. Troubleshooting .........................................................
1. Licence Agreement 1. Licence Agreement This is a legally valid contract between you, the end user, and Testo. When you or a person authorised by you opens the sealed CD-ROM package, you recognise the provisions of this contract.
2. Installation 5 2. Installation Administrator rights are necessary for installation. USB interface/adapter is not connected to the computer. 1 Insert CD-ROM. If the installation program does not start automatically: > Open My Computer, select the CD drive, double click on TestoSetup.exe. - The question Do you want to allow the following program to install Software on this computer? is displayed. 2 Confirm with Yes. - The assistent for the testo USB Driver setup appears. 3 Continue with Next.
3. Virtual COM port settings 3. Virtual COM port settings The following description applies only to testo 174 (0563 1741), testo 175 (0563 1754-1761), testo 177 (0563 1771-1775), testo 580 (0554 1778) USB interface/adapter is connected to the computer, USB-driver and, if necessary, adapter-driver are installed. For Windows XP: 1 Select Start > Settings > Control Panel > System > Hardware > Device Manager. For Windows Vista: 1 Select Start > Control Panel > System and Security > System > Device Manager.
4. Troubleshooting 7 4. Troubleshooting Error report: In the instrument manager appears. Cause: Driver installation was not carried out correctly. Error correction: Re-install driver. In Windows XP: Context menu Properties > Driver > Update driver... > OK. In Windows Vista: Context menu Properties > Driver > Update driver... > OK. In Windows 7: Context menu Properties > Driver > Update Driver... > OK.
0973 0441 en 04 V02.
