User Guide

²
Activating ddifferential ccalculation ((delta):
 The instrument is in measurement view.
Differential calculation is performed with the parameters that are shown on
the display.
1 Press and to select the measurement channels from which the
difference is to be calculated.
2 Press to open the main menu.
3 calc. ¬ .
4 Press / to select Delta and confirm with .
6.2.5 Material
Some readings relate to particular material properties. These can be activated
using the stored material characteristic curves.
10 material characteristic curves are stored in the default setting. The material
can be reassigned and the characteristic curves adapted using the PC software
(635-2 only).
²
Activating aa mmaterial ccharacteristic ccurve:
 The main menu is open, Menu is displayed.
1 Material ¬ .
2 Press / to select the desired material and confirm with .
OK
OK
OK
OK
6. Setting the instrument52