User manual

15
11.3 Measurement spot, Distance
A specific spot is determined depending on the distance from the
measuring instrument to the object being measured.
Measurement optics (Ratio Distance : Measurement spot)
12. Information on contact measurement
Observe minimum penetration depth in immersion/penetration
probes: 10 x probe diameter
Avoid applications in corrosive acids or bases.
Do not use spring-loaded surface probes on sharp edges.
de
enfresitptsvnl????
500 mm
700 mm
1000 mm
2000 mm
1500 mm
Ø 16 mm
Ø 18 mm
Ø 24 mm
Ø 36 mm
Ø 68 mm
Ø 100 mm
testo 830-T4
Laser
Laser