User manual

2 - Move joystick (4) up/down to select auto, manual or ScaleAssist
and then press OK (4).

Automatic scaling is activated. A is displayed bottom right.
Manual scaling
1 - Move joystick (4) left/right until min. temperature (lower limit
value) is highlighted.
- Move joystick (4) up/down to set the value and then press OK (4).
2 - Move joystick (4) left/right until min. temperature (lower limit
value) and max. temperature (upper limit value) are highlighted.
- Move joystick (4) up/down to set the values and then press OK
(4).
3 - Move joystick (4) left/right until max. temperature (upper limit
value) is highlighted.
- Move joystick (4) up/down to set the value and then press OK (4).

Manual scaling is activated. M is displayed bottom right.
Configuring the quick select key
- The quick select key (5) is an additional navigation option, which
you can use to call up functions simply by pressing a key.
1 - Move joystick (4) right to select the configure key function.
2 - Move joystick (4) up/down to highlight the required function, then
press OK (4).

The icon for the selected function is displayed bottom right.
3
- Press (5) to call up the function.