User manual

Displaying and deleting images
1 - Select image gallery function. To do this, see Getting to know
the menu.
2 - Display image: Move joystick (4) left/right/up/down to select the
image, then press OK (4).
3
- Press (5) to delete the image.
Setting emissivity
Function is only available if the infrared image type has been selected.
The emissivity describes the capability of a body to emit thermal
radiation. For correct measurement results, the emissivity can be set
according to the specific material.
With ε-Assist, the emissivity and reflected temperature are
automatically detected.
RTC (Reflected Temperature Compensation) is a correction value for
thermal radiation through other objects.
@ More information can be found in the instruction manual and the
pocket guide.
1 - Select the emissivity function. To do this, see Getting to know
the menu.
2 - Move joystick (4) up/down to highlight the required material, then
press OK (4).
Setting measurement
Function is only available if the infrared image type has been selected.
1 - Open the measurement submenu. To do this, see Getting to
know the menu.

The submenu with measurement opens:
• Pixel mark:
o Single point measurement: the temperature measuring
point in the centre of the image is marked with white
crosshairs and the value is displayed. In saved images,
the crosshairs can be moved using the joystick in order to
read the value of other measuring points.